Discussion Locked

Windows 2000 server VPN

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Windows 2000 Server and would like to setup a VPN so that two of our employees can access a Act database from home. The office is running a DSL Cisco 675 router and both users also have DSL at home. This is my first configuration in setting a VPN Server and Client up. Can anyone give me good examples in how to do this? I was also told that I would have to configure the DSL router at the office.

6 replies

by don_c

I know this should be in the Q&A but all I get are url's that tell me what I all ready know. I'm trying to setup an FTP at my home or a VPN so I can transfer some very large files

by nicholasclayg

This has been tested on a Windows 2000 Active Directory domain controller and on a Windows 2000 member server that is part of an Active Directory domain. In these 2 instances, Active Directory domain user accounts and passwords were used to make the VPN connection. The set up and config of this set up is not too difficult if you are familiar with AD, if not- start reading up on it!

If the Windows 2000 "Configure Your Server screen is open", click on Networking, then on Remote Access and finally on Open Routing and Remote Access. And if you happen to like doin it the old way you can start it from Start -> Programs -> Administrative Tools -> Routing and Remote Access.
You my friend can select your server in the left window (Depending on the window size you may need to make it larger to see Routing and Remote Access) and select Configure and Enable routing and Remote Access from the Action menu.
The Routing and Remote Access Server Setup Wizard will start. Click on Next and then choose Virutual private network (VPN) server and click on Next. In the Remote Client Protocols box, the only protocol that is required is TCP/IP. Click on Next. In the Internet Connection dialogue box, accept the default (with selected) and click on Next. In the IP Address Assignment box, decide whether you are going to use DHCP or a specified range of addresses for VPN clients and then click on Next.
(if you are asked to provide a large range of addy's, click on New and add in an address range that will be used for VPN clients) You can add several address ranges as needed. When you are done here click next. IF you opted to use DHCP and your server has a static IP address, you may see a warning; click on OK (Dont worry be happy your still in the Green)
On the Managing Multiple Remote Access Servers page, accept the default No, I don't want to set up this server to use RADIUS now and click on Next. Click on Finish.
If you opted to use DHCP you may see a message about config DHCP relaying. This is something I really never had to mess with so I would suggest that if you require this (And you should know if you do, if not What are you reading this for lol)that you test this out on your own for I will not be of help on this matter, since I have not performed it.The RRAS will now be started. In the Routing and Remote Access management console, make sure that your server is still selected and select Properties from Action menu. Click on the Security tab and then on the Authentication Methods button. Disable Microsoft encrypted authentication (MS-CHAP). This should leave only Microsoft encrypted authentication version 2 (MS-CHAP v2) enabled. Click on OK. If applicable remove IPX or NetBEUI you will have a tab for each protocol. You should dis these protocols ? in general you only need to allow IP access. For example, to disable IPX, click on the IPX tab, and switch off the Allow IPX-based remote access and demand-dial connections option.
Information can also amount of information that gets logged. When you have finished, click on OK.
Look in the right-hand window. There are several other items that may be useful Firstly, you can enable Remote Access Logging. Open up the Remote Access Logging folder and then double-click on the Local File to change settings. You can view connected clients (Remote Access Clients) and you can set up Remote Access Policies.
Check in the right-hand window under your server name for the Ports entry. If you select it and choose Properties from the Action menu you can configure the number of ports (i.e. VPN connections) that are available.Adjust the number of PPTP ports as required. You can probably turn off the Demand-dial routing connections option as well.

by rstringer

Hi All,

I am trying to do the same thing but have a couple questions.

My DC is on the internal LAN and is currently set up providing DHCP and DNS. The RAS server is not a member of the domain. Does it need to be? I'm concerned about AD being exposed to the Internet.

Also, would I be better off having DHCP run on the RAS server? If so, is there any problem having DHCP exposed to the Internet?

Of course, the RAS server has two NIC's, with the external NIC getting the IP config from the DSL router. The internal NIC has a static IP config. All clients point to the internal DNS/DC server and it points to itself. DNS has the, I think its called the root zone, deleted and is hopefully configured to forward DNS queries to the DSL router.

If anyone can, I'd really love step-by-step instructions. I have found some good articles but not the step-by-step that I'm looking for. At least not that addresses my questions.

TIA,
Rich

by pres

Personally I will rarely connect a windows machine to the Internet, even with port forwarding.

The easiest way is to install a Linksys BEFVP41, BEFSX41, or even a USBVPN1 at the client locations and a BEFVP41 or BEFSX41 at the office. This requires a static IP at the office and a static or dynamic IP at the remote locations. The equipment is cheap, easy to setup, and fairly secure. Best of all they forward netbios info so the remote systems act as if they are on the LAN.

If you?re on a budget and have a couple of older systems lying around you can download Smoothwall GPL Firewall with VPN capability. It?s easy to configure if the all locations have static IP's, and doable if not. In this case I suggest using a Linksys product at the remote locations, as it is easier. There is some great config examples at www.freeswan.ca or you can email me.

One final note: When using a BEFVP41 or BEFSX41 install a simple timer at the plug that will reboot the system nightly. After a month or so of uptime they can act buggy but the timer solves this issue.

by nicholasclayg

Well I was just giving a step by step, way to do it (of course this is on a corporate level) but your method sounds solid as well. Best way is trial by fire, build a small network and give it a go see what happens.

by userdeletedbyrequest

Hello,
Someone working for us had an accident last week and trapped a large number of Discs in the safe door. In consequence to this the discs got smashed, such as Windows Server 2003, Windows Advanced Sever 2000 & Windows Server 2000. I was just wondering if you would make me a copy of your windows server disc and post it to me? This is completely legal as I will be using my existing serial number. I am willing to pay the costs to produce the disc and post it. Please can you help?

Please E-mail zakflemingo@gmail.com

Thanks

Zak

This discussion is closed to new replies.