Discussion Locked

Windows 98 bootup without login

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have one of my 98 boxes that always boots up without requiring a login. I have been unable to get this machine to stop at a login prompt. I have to logout and back into the computer to get onto my network. I have tried the Microsoft Family login, but this did not work.

15 replies

by thechas

Boot into safe mode and delete the password list files (*.PWL)

You should get the log-on screen when you re-boot.

Next, make sure that the correct networking protocols for your network are installed.

Chas

by narwahl

Poster rated this answer.
I've already done this. It worked once and then started booting without a login.

by curacao_dejavu

Hi:
step 1: check if in the control panel, add/remove programs is not a program called tweakui installed. One of the options are to logon automatically into windows.
2: remove family logon and use client for microsoft windows and select that as the option to login.

if those doesn't work, you will have to remove the network card form device manager, and uninstall all the options of network (tpc/ip, netbeui, the different clients etc, so it has to be completely empty.
then reboot, install the nic, and the protocols, and the appropiate clients and login.

success
Leopold

by srikrishna

go to network neighbourhood properties there select windows logon.reboot whn it asks for the first time for uid &password just press enter..next time onwards it wont ask..

by 1stladytech

We have run into this in the past, and the only way that I have been able to fix it is to overload the op sys. I am not sure why it does it, only that there is a corruption somewhere that the overload fixes. I never have had enough time to try to find the reg problem.

Vickie

by mshimla

Edit registery look for AutoLogon Key set the value to "1" if it is "0" restart your PC your problem should resolve 100%.

Another Solution is to reinstall all your protocol and serveries in Network. Also install NetBEUI along with TCP/IP.

by mark

Q141858 and Q141858

http://support.microsoft.com/default.aspx?scid=kb;en-us;141858&Product=w98

This behavior can occur if any of the following conditions exists:
The Primary Network Logon setting is not set correctly.
The following entry appears in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net

AutoLogon=xx

NOTE: The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.

: The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.You are logging on to a Novell NetWare network and the server you log on to is running multiple frame types.
: The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.You are logging on to a Microsoft or NetWare network and you have cached your network password.
: The AutoLogon value must be a BINARY value and must be set to 00 for automatic logon to work.The network adapter is improperly configured.

by mark

Troubleshooting Steps
Click Start, point to Settings, click Control Panel, and then double-click Network. Click the appropriate setting in the Primary Network Logon box, and then click OK.
Delete the following entry in the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Network\Real Mode Net

AutoLogon=xx

Click Start, point to Settings, click Control Panel, and then double-click Network. Double-click IPX/SPX-Compatible Protocol, click the Advanced tab, click Frame Type, change the value from Auto to the specific frame type that is running on the server you log on to, click OK, and then click OK. If you do not know which frame type is running on the server you log on to,contact your network administrator. Repeat this step as necessary, trying each frame type, to determine if selecting one of the frame types causes a network logon dialog box to appear at startup.
Disable the Automatic NetWare Login option by using either System Policy Editor (as described on page 515 of the Microsoft Windows 95 Resource Kit), or by using Registry Editor to add the following DWORD value:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NWNP32\NetworkProvider\DisableDefaultPasswords = 1

For additional information about troubleshooting problems related to enabling the Maximum Sockets or Maximum Connection setting, click the article number below to view the article in the Microsoft Knowledge Base:
142489 Problems After Modifying Maximum Connections or Sockets Value

This issue can also occur if the following setting is listed in the registry under the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Network

Disable Password Caching

Whether the value is set to 0 or 1, remove it to resolve this issue.

This discussion is closed to new replies.