8 replies
by avachon
by kidrich
Well first off I have a little problem with the previous answer that stated " go to add/remove programs and see if you can get rid of games, deskthemes, etc. that are not vital at this time"...I don't see how this could help! I really don't think you should go around randomly removing programs just cause your system wont boot!!!! I really think that would not be productive at all!!!!
But anyways on to some hopefully more *helpful* advice. Fist off press F8 when you boot to go into the boot options menu and choose to write the bootlog. Then boot normally and examine the log to see if you can pinpoint where in to boot process things go wrong.
Another idea that has worked for me in the past has been to boot into safe mode, right click on My Computer and click properties. In the device manager, remove a bunch of your devices (I sujest removing the Dispay Adapters, Floppy disk controller, Hard disk controller, Modem, Netowrk adapters, and SCSI controllers, Sound video and game controllers and perhap
by kidrich
oops..got a little long winded there...it cut me off...let me try that last paragraph again :)
Another idea that has worked for me in the past has been to boot into safe mode, right click on My Computer and click properties. In the device manager, remove a bunch of your devices (I sujest removing the Dispay Adapters, Floppy disk controller, Hard disk controller, Modem, Netowrk adapters, and SCSI controllers, Sound video and game controllers and perhapers the system devices) Then reboot (andpray) and try to go into windows normally. By removing the devices windows is forced to re-detect all the hardware again and perhaps if a driver is causing the problem this will help. I have seen the network adapter as the cause of several simularproblems, so if you think removing all the devices a bit much just try first removing the network adapter and reboot...good luck!!
by mphoffar
Boot into a dos prompt and edit the system.ini. You want to look for a line that says
display=pnpdrvr.sys
and change it to
display\vga.sys
You'll end up having to reload the video drivers, but this should get you into windows.
Goodluck to you
Mark
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending