Discussion Locked

Windows 98SE Hangs on Shutdown

0 helpful
29 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Now I know this question has been asked many times and I have read all of the replies, however after doing most of what was recommended, I still have problems with shutdown. However when I go into safemode, it shuts down correctly. When I restart, it will shutdown correctly and restart as per normal.
I have gone to the microsoft page and followed their instructions on shutdown and testing, but still no correct shutdown.
I have installed all the patches required - wont shut down.
Made a shortcut using rundll.exe - wont shutdown
I have upgraded my VGA driver - wont shutdown
I have disabled my power settings in the control panel - wont shutdown
I have run sfc and it detected a corrupt setup file, I restored from CD but still no correct shutdown.
I have checked my device manager and there are no conflicts and no duplicate entries.
This is a new installation of Windows 98SE which was installed by an outside company. I did notice that they have fiddled with the logo and it has theiradvertising on it. Im not sure if this could be part of the problem or not.
Im going insane here. Anymore suggestions or is there something I may have missed?
Thanks in advance.

29 replies

by csoares38

If you have Norton's Antivirus, check your scan floppy on shutdown options.
Options,Advanced...

by csoares38

Go to Run, type msconfig,go to advanced check disable fast shutdown it may already be checked.

by mmdkj.family

Does the logo screen start in safe mode where you are having success?

Safe mode is not loading something that Windows can not close thus it works okay. Normal mode is loading something that Windows can not close or continually waits to close.

Try opening "msconfig" from start, run and remove checks from all items on the Start up tab. Disable everything from Config.sys and Autoexec.bat tabs also. On the Win.ini tab disable the Run and Load lines under Windows folder. Then click OK and reboot. Try to startup/shutdown multiple times. If shutdown works okay use msconfig to turn on one item that was disabled at a time until you find the one that is the problem. Be sure to reboot and shutdown/restart with each item you enable to catch whenthe problem returns.

by zharia

The machine doesnt have antivirus loaded.

There is no option for me to "disable fast shutdown" when I click "advanced on msconfig.

I unchecked everything in the startup tab, config.sys, autoexec.bat and also the run and load on the windows folder.

I restarted the machine and then chose shutdown...it still wouldnt shut down even though I they all were unchecked.

Anything else??

by Former member

Just checking the obvious: Make sure you don't have a .wav file on windows exit in the Control Panel -> Sounds applet. This can cause shutdown to hang (usually if the .wav is damaged).
Next: Though I have never seen a changed logo hang the shutdown process, this may be the cuplrit. The location of the startup/shutdown bitmaps are: startup - c:\logo.sys wait - c:\windows\logow.sys safe - c:\windows\logos.sys
You can open these with mspaint.exe for editing or just looking at them. Here is a location that will tell you more about startup/shutdown logo modification. http://www.suite101.com/article.cfm/windows_98/38714
Next: You might look into an automated shutdown utility for further troubleshooting and isolation. I recommend winsoft's shutdown now! at http://www.dworld.de/winsoft.htm

Happy Hunting!

by Former member

Just checking the obvious: Make sure you don't have a .wav file on windows exit in the Control Panel -> Sounds applet. This can cause shutdown to hang (usually if the .wav is damaged).
Next: Though I have never seen a changed logo hang the shutdown process, this may be the cuplrit. The location of the startup/shutdown bitmaps are: startup - c:\logo.sys wait - c:\windows\logow.sys safe - c:\windows\logos.sys
You can open these with mspaint.exe for editing or just looking at them. Here is a location that will tell you more about startup/shutdown logo modification. http://www.suite101.com/article.cfm/windows_98/38714
Next: You might look into an automated shutdown utility for further troubleshooting and isolation. I recommend winsoft's shutdown now! at http://www.dworld.de/winsoft.htm

Happy Hunting!

by rakeshkanojia

On Some of the PC's WIN98SE needs the shutdown patch. The reason for hanging is because WIN98SE attempting to force a shutdown before it is actually ready.
1. Try Removing all the sound
Start -> Setting -> Control Panel -> sound

2. In the BIOS and set for a non pnp OS

by mike

Microsoft's reason for the shutdown problems are that during the shutdown process, it's attempting to "kill" apps currently in memory, instead of the installed app. ie: mcafee, norton, even some of it's own drivers. There are known issues with this. I would attempt to kill Everything in your task manager except for systray and see if it shuts down. Also this problem is more prominent with laptops due to the OEM "power saving" drivers. These problems can be a booger. P.S. don't forget that you can edit the registry and remove the startups from the run key and let us not forget any legacy stuff in the win.ini file using the run or load command.
Good Skill
Mike

by zharia

When I shut down there are only three in the task bar. Systray, mapis32 and explorer. I took out mapis32 but it still wouldnt shut down.

by badger

Is your Box an AMD processor if it is then
you can download the patch from AMD to fix the shut down . I have only seen this failed shutdown on the AMD though,
Goes to Windows is shutting down but never tell you it is safe to shut down sort ofthing > ?
Try the AMD patch if it is AMD if not I can't think of anything else.

by miketpir

Have you checked the event log? You also may want to enable the "DR WATSON" part of 98SE. Last case senario, you may want to install a "System Utility" to check your machine for invalid .dll's that remain open because there are no programs to close them. You can do a C-A-D (control-alt-del) to see what is running before you shut down, close one at a time and see if it shuts down correctly. Time consuming but effective.

by mjohnson

I have not encountered this problem with Win 98, however, I did experience it with Win 95. The solution was to uninstall, then reinstall Internet Explorer. I have no idea if it will help in Win 98, but maybe it's worth a shot.

Good luck.

by pandon

Hi Zharia, It seems you have a stumper here... The only suggestion, other then those mentioned, I can come up with is network drivers... try removing the network drivers (both nic and modem) shutdown and then remove and nic or modem devices. restartinto safe mode and confirm all network related devices are gone from the device manager... Now reboot into Normal mode and try the shutdown... If this works make sure the new drivers are un-archived in directories you can easily get to... shutdown the system and re-install the hardware one piece at a time using the new drivers...
*** Two things before you do this... 1st, download the newest drivers for said nic/modem device(s)... and 2nd remember to write down all networking settings before you remove them...
Please let us know how your comming with this...
Ron Walker
PC Administrator

by zharia

It doesnt have a modem and the network card has been checked and drivers downloaded accordingly because the network card is a new install. I dont have any problems with the network.

by jamer777

Check the bootlog.txt by using wordpad, and at the end; the last four lines like end terminate then terminate does not end with novell query is one examplample

by jamer777

I have had the shut down problem on my daughters gateway and my own home made machine, hers was fixed with offline help advice but i still have the problem,i read that amd 350mhz and higher have trouble with win98se

by benj7

This is part of "the answer," but a trick I discovered. (I think you are on the right track scanning msconfig.) What I discovered is this. If, *** just before *** I think the system should be getting very busy, but instead it hangs if I will hit my key, wait a few moments and hit enter, the system will end up shutting down properly, and after a few times with such treatment will stabelize and shut down properly.

This discussion is closed to new replies.