Discussion Locked

Windows NT Server 4

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,

My problem is I have some employees that do not have the internet, however they need it to check there mail from home. We have a Windows NT Server 4 setup on our main server.

How can I allow people to call our server, Login from home and use our Internet access (Our company uses Broad Band). Our NT Server is connected to our network and has the internet, so how can I grant my employees access to our internet. We already have a phone line setup for it.

Any help would be appriciated.

Thanks

6 replies

by saqibmabbasi

Hello,
You can achieve this by setting up your own dialup. meaning the same way as you can dial to an ISP now the employees can dial to your company. You can provide them appropriate access and set the server accordingly. what you will have to do is give them an IP or you can keep them server assigned also.

hope this helps.
Take care.

by michael34

Thank You,

Alright I have another Related Question. I have a PCI Modem (V.90 Internal PCI Modem). I installed it on NT 4 Server (It says it supports it), However it cannot find the modem. I installed the drivers but it can't find it. For some reason it only displays and checks COM Port 1 and 2. DO I need to add a COM Port for my PCI Port?

by d.walker5

Re: your Modem problem, see KB161516. Troubleshooting Modem Problems Under Windows NT 4.0. This article will help diagnois your problem.

To install and configure Dial-Up Networking see KB171015.

Follow the How To: procedures as discribed in these KB articles and you'll have everything up and running.

This discussion is closed to new replies.