Question Locked

Windows Vista install with 2 IDE drives and 2 Sata Drives HELP!! ;)

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I built a computer a few months ago that had XP on it and I am trying to put vista on it. The computer was working fine until I wanted to install and boot vista from the sata drive. When installing window's vista it only picks up my IDE drives as available to install the OS. So I checked in BIOS and changed the settings for the sata controller to IDE instead of Raid. So now, unlike before, Bios lists the sata drives as present with their respective capacities- ie 500GB and 250GB. Everything looks good in the bios so I put the disk in to install vista, and right after it says installing files, I get a blue screen that says "machine check exception" and that windows stopped to avoid damage to the system. If I change the settings for the sata controller on the mother board back to Raid instead of IDE, everything works fine. But the sata drives are still not seen by the windows installation program. Could it have anything to do with master or primary settings for the drives? In bios is lists the ide as IDE0 = master
IDE1 =slave
IDE2 -dvdrom master
IDE3 (sata drive,- master)
IDE4 (sata drive- master
I tried doing "load drivers" at the installation promt, I've put in the cd for the motherboard, and the cds for the disk drives but it says there are no drivers.
I've been looking around for answers and sae soemthing about disabling AHCI but I don't remember seeing that on my bios and then another mention of sata+pata but I don't recall seeing that either...
Am I missing somethign obvious- maybe? All I want is install windows vista on the 250GB sata drive and use the other sata drive and 2 ide- ata drives as storage.

4 replies

by hal 9000

Now the Bad News you need to copy the SATA Drivers to the Root of a Floppy and install from there.

When you use a CD ROM to try to install the SATA Drivers from it isn't recognised by the Vista Installer so you are unable to install the SATA Drivers. But once you copy them to the Root of a Floppy and even if you only temporally plug in a Floppy Drive to load Vista from you'll need the floppy before you can install the SATA Drivers.

Col

by hoffa23

after an entire day of surfing forums and what not, I figured out how to get vista 64 on my sata drives- sheesh

Thanks all who read- I'm not sure if you can post links here, but if you are having trouble with yoru sata drives and windows vista 64 bit- you need to get THIS driver set from here:
http://www.nvidia.com/page/uli_drivers.html
download the latest version, then you must extract the .exe and burn the files to a cd.
When you go to install, leave your bios setting to Raid, not IDE- you're sata drives will not be listed, but that's ok... when windows installation begins, no hardrives will be listed, click load driver- put the cd you made with the exe extracted files into the drive and click ok
it will say no drivers were found, at that point, click browse- to browse your cd- you need to go into the sata sub folder then highlight AMD64 and then click OK- (evidently when looking for drivers, it doesn't search subfolders)the driver file will pop up- you click continue and BHAM- there your're sata drive(s) is/are. Select your drive for installation and you are set-

Hope that makes sense- I'm learning as I go- questions- e-mail: hoffa23@att.net- if I can help, I will

by albant1

It usually happens when sata HDD is not the native hdd for the mobo. I have not tried Vista but in Xp there is an option of F6 during installation and have floppy with the sata drivers needed. Also you need to set up the start sequence in the bios features to enable boot from sata drive.
Hope it can help.

This discussion is closed to new replies.