5 replies
1. Check to see if it's detected in the system BIOS. If not, go through the detection process in the BIOS.
2. It is possible that the IDE cable became lose. You could check for this on your own, if you're bold enough to remove the cover of the laptop.
3. The MBR (Master Boot Record) could have become damaged. Boot up on a bootable floppy disk to see if you can access the C-Drive. The command sys c would restore the damaged boot files.
4. Perhaps run a disk repair utility (such as Norton). I believe with your XP system, your CD Drive will be available, even when booting from a floppy. (But I'm not 100% certain.)
by sgt_shultz
by fadbel
by bigkenny
you can do a new install without desstroying your data boot from windows xp cd select install
then repair it will remove old os and reinstall a
new os leaving all files and folders intact if your not cofident you could buy a usb hard disc
enclosure remove your hard drive from the lap top and transfer your file temoraley to another
machine
by wlbowers
Before I fiddled with that disk to much I would do the following.
You can buy an adapter that allows you to take the laptop hard drive and install it on a desktop unit. Cables to go part number 17705.
Install it on a desktop as a slave drive and backup your data.
Good Luck Lee
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending