Discussion Locked

XP Pro sees network drives but cant Ping

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have taken over a small network consisting of 1 NT 4.0 server and 2 NT 4.0 workstations

We are now adding workstations and the new workstation is XP pro. I assigned it an IP and it still could not see the network, after adding netbeui I could mad drives, but I can not ping the ip of any other machine or the server.

The other NT machines can not ping IP's but they can ping machine names resulting in a response of the proper IP ?

The XP machine can do neither ?

5 replies

by erikdr

Apparently, the NT servers do not have IP and are solely contacted through NetBEUI. Note that NetBEUI is something totally different from Netbios-over-IP with WINS, and is a completely competing protocol. It might be that NT clients, when both IP and NetBeui are installed, can 'redirect' to ping also over NetBeui. This would explain wht the NT machines can 'ping' the server. However this is definitely not the way in which ping was supposed to work, so if XP fails this makes sense. (Also XP expects DNS IP names, not the WINS mapping which NT workstations expect).

So a first check would be whether the NT Server has full IP enabled, and whether you can ping the workstations from the server. If not, install IP and then also XP should see it. (Also make sure there is a DNS service running on the NT server, or alternatively change XP so that it accepts WINS.)

At your service,

- The Netherlands

This discussion is closed to new replies.