Discussion Locked

XP to 98

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I bought a second hand Compaq notbook Presario 1400 with XP pro.I want to change to Window 98 se

5 replies

by thechas

I believe that per the EULA, you can downgrade the OS to a previous version.

To do that, you will need to:

Remove all partitions from the hard drive.

Re-partition, and format the drive as a FAT32 volume.

Copy the system files over to hard drive, and make the hard drive boot-able with CD-ROM support.
(format C: /S)
You will need to copy and edit the autoexec.bat and config.sys files from the W98 startup disk.

The above can be done with a W98 startup disk.

You use fdisk to remove and re-define partitions.
There are links to tutorials at www.fdisk.com/fdisk

You need a copy of W98, and a W98 startup floppy.

I personally, would set up the drive with at least 1 extra partition.
That way, you can copy the W98 CD to theextra drive, boot from the formatted hard drive, and install Windows from the hard drive.

I use a hot-swap bay, and a 2.5" to 3.5" drive adapter kit to set up drives in my main system.
I also create a folder named drivers, and copy the installation files for every hardware device on the system into appropriately named sub-folders.

My only concern, would be finding W98 drivers for all the hardware.
Your laptop is 4 years newer than the W98 reference drivers, so they likely will not function properly.
See if Compaq (www.hp.com) offers W98 drivers for your laptop.

Chas

by camo

Thanx,I've done as you explained and I fond the drivers in Hp site I'll start downloading .

This discussion is closed to new replies.