Discussion Locked

Can't share 98 PC resources w/ an XP P

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently added an XP PC to my network and can not get to shared resources on the 98SE PCs. The 98SE PC shares are all working. The workgroup name is the same for all PCs. I can ping between PCs OK. Any tips appreciated.

12 replies

by cul8rm8e

To start the Network Setup Wizard, click Start, point to Settings, click Control Panel, and then double-click Network Connections. Under Common Tasks, click Network Setup Wizard.
The Network Setup Wizard can only be run on computers using Windows 98, Windows 98 Second Edition, Windows Millennium Edition, or Windows XP.
Run the wizard on the Windows XP host computer first. The host computer is the one sharing its Internet connection.
Before running the Network Setup Wizard on computers running Windows 98 Second Edition or Windows Millennium Edition, make sure Internet Connection Sharing is disabled on these computers.

during setup you will be asked if you require a setup disk ,click (yes).
Insert the network setup disk into the computer you want to network.
open up floppy drive and
Double-click netsetup.exe.

this will allow you for file sharing.

by murphysbest

Thanks but, you are assuming I'm sharing an Internet connection from a host PC which is not the case. Please let me clarifiy the resouces being shared successfully with the 98 PCs, but not with the added XP PC..... they are project files and printers connected to a local PC. Total PCs involved are 6 in a small office.

by cul8rm8e

what you have to know is that winXP has a centralised file and folder connection sharing facility.
if you want to share files or folders from your XP machine you will have to run the NETWORK SETUP WIZARD.
this is where it is----To start the Network Setup Wizard, click Start, point to Settings, click Control Panel, and then double-click Network Connections. Under Common Tasks, click Network Setup Wizard.

internet connection sharing (ICS) is OPTIONAL.

once you have done this you will have a centralised share DIR on your XP machine, to add files or folders for sharing from your xp machine all you do is drag what you want to share into that folder.this will ensure your XP machine is set up for sharing.(this will ensure that you haveinstalled all neccesary utils for file and print sharing on your XP machine. REMEMBER even though you put your XP machine in the same workgroup you MUST run this to install everything needed for sharing,whether it be file,folder,or print!

now,you want to connect to a shred file or folder on your 98SE machine(open My Network Places on your desktop)click add network place and go through the wizard setup.( browse for any file or folder from ANY pc on your network.

do the same from your 98 machines and that should get you going fine

RECOMENDED: AS TO MY PREVIOUS POST I SUGGEST YOU MAKE A SETUP DISK AND RUN THIS IN ALL YOUR PC`s this will allow you to centralise all your file and folder and PRINTER sharing. drag all files and foldersto this centralised folder which will make it easy to find shred files on any 98 pc`s. (winXP makes life a bit more simple regarding this issue. (USE IT! )

to add any printers on your XP machine use the add printers wizard (start,settings,printers and fax`s,) make sure you have shared your printers on all local machines.

by murphysbest

Thanks again. I DID follow your recommendation including creating/running the setup disk. I still can't see shares from either PC. If you have any other thoughts.... pls let me know.

by spioinu

In the network settings, disable the firewall function, make sure the Client for MS Networks is enabled, and make sure NetBios over TCP/IP is enabled. By defualt NetBios is set to use the DHCP function. If you do not use DHCP then netbios over tcp/ip is not used. Browsing in windows is dependant on netbios and this would keep you from being able to access network resources.
good luck

by murphysbest

I am using DHCP on the router (it is disabled on the clients), client for MS Networks and TCP/IP is being used. The NetBios option is grey, but the check box is checked.

by cul8rm8e

1, how many machines on your network?
2, what O/S are used?
3, are all mahines on the same subnet?
4, tcp/ip and ???? protocols are used?
5,is it client/server or peer to peer? internet connection (shared?) and (dialup, cable,

i think up tillnow we have been assuming too much, if you can give me some more info im sure i can help you resolve this quickly.

by murphysbest

First, thanks for sticking with me. Answers follow
1&2)I'm running 4 PC's, 3 w/ Win98SE and 1 w/ WinXT. Two of the 98SE computers share their printers.
3) all are on the same subnet.
4)TCP/IP w/ client for Microsoft Windows.
5)Peer to Peer via Linksys Cable/DSL Router. It provide DHCP and assigns the IPs. The Router WAN connects to the Motorola Surfboard cable modem.

All PCs can access www. All ping the router and each other, but I can not get the shares to work even after following your previous posts. Hopes this helps.

by murphysbest

As a work around for file sharing, I installed IPX on the WIN98 and on WINXT. WINXT can see WIN98 shares, but WIN98 can't see WINXT shares. Footnote: WINXT is the HOME edition!

This discussion is closed to new replies.