Discussion Locked

10/100 to 10/100/1000

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
if i have a 24 port 10/100 firewall, can i run one cat5e cable from one of those port to the uplink on a 24 port 10/100/1000 switch and run all the users and servers on a gigabit network? i need to speed up logon times and such.

5 replies

by jamesrl

If the servers and users are all on the gigabit switch then their networking will be faster, at least on paper. But really, is your bandwidth the cause of your slow logons? I wouldn't be so sure. Are these slow Windows logons?

James

by mg_roberts

These are logons to the domain with roaming profiles. small profiles logon pretty quickly but the problem is some of our users have pretty large profiles.

by akalinowski

GBE doesnt always help w/ load times, run network monitors to see how much bandwidth is being used by the hubs, if its maxing out @ a 100mbps, then upgrade, but the problem could be in the wiring, or nics as well

by Member 25348569

Find out why they're so large. Check for things such as GoogleEarth which can write upto 400MB in Application Data. Firefox - rather stupidly - puts its cache in Application Data rather than Local Settings - move it. Some of my users save documents in c:\Documents and Settings\username. These are picked up as part of the roaming profile. do your users need roaming profiles. I switched off roaming for my fifty top profiles and only one noticed.

by mg_roberts

i found setting my dns settings correctly helps a little bit. my firewall/switch hands out dhcp and set itself as the primary dns server. i changed it to the domain server and logon times are pretty quick now. i am still going to upgrade to gigabit though. we have in house developers that transfer tons of data during day, and large file transfers are slowing them down.

This discussion is closed to new replies.