10Base or 100Base?
How do I determine if my network is a 10Base or
100Base? I am fairly sure it is 10base but
is there a way I can be sure?
Networks
How do I determine if my network is a 10Base or
100Base? I am fairly sure it is 10base but
is there a way I can be sure?
The 10Base indicator is lit on the clients and
on one of the servers but one server has the
100Base indicator lit and the hub has several
of the 100Base indicators lit.
by michael
by rbratton
If you have manageable switches/hubs, you can use the management tools (e.g. console port or in-band/telnet) to look at each port's configuration.
I have found that is is advisable to lock in ports that are connected to servers both on the switch/hub and on the server to a particular speed (10/100) and duplex setting (full/half).
by tbradley
You have a autosense 10/100 hub, and a mix of Network Cards. The way to check the Clients is to run a program called winipcfg. It will tell you type, flavor, and speed of the NIC.
If this is a small network, it is really nothing to be concernedwith, except to make sure your server is at 100mps if capable.
by turco.ar
An indirect approach (and not only solve only your question), is try 3Com Trascend Network Supervisor. This software is FREE
(http://www.3com.com/tns) and enables you to build a map of your network, so you can identify the devices on your network, and see how they are connected. With this map, you can monitor devices and links, using Network Supervisor to watch your network for you. It allows you to view and manage your network from a single computer even if you do not have previous network management experience.
This discussion is closed to new replies.
Sort by Trending