Discussion Locked

1C entry gives a 0.0.0.0

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When you do a NBTSTAT -c on a workstation it comes back with 0.0.0.0 for 1c. Dialing in over Ras sometimes gives the user the error domain controller cannot be found. Then when they try agian it works. Lhmost works for the dialing machines, but whatis causing 0.0.0.0 on the lan workstations, any direction point would be appreicated. I have a net mon coming to me via the customer.

3 replies

by mike.batters

This sounds very mich like you have a problem with the contents of the WINS database. If you have server WINS replication running this will be a little more tricky as the corruption will have been replicated to all servers.
In either case the easiest fix is as follows:

1. Stop WINS on the server (or all servers simultaneously).
2. On each server go to C:\WINNT\System32\WINS and move the contents to one side (another dir somewhere safe)
3. On each server restart the WINS service.

This will start WINS with a completely blank database. You completed browser lists will disappear until all the servers have found each other again so i would advise doing this after everone has gone home for the day, so that the DB can rebuild overnight.

Hope this helps,

Mike

This discussion is closed to new replies.