Discussion Locked

2 Win2000 pcs share printer via switch

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Everything worked until we migrated these users all to Windows 2000 PCs. I have come across this issue 2 times in 1 week. In both instances 2 PCs are sharing their printer locally via switch. Here's the catch...in both cases only one PC is able to print normally. The one that can't print cannot even see the printer. If I directly connect them to the printer everything works. A coworkers suggestion is to make them buy jet directs & just put the printers on the network, but I know there must be some setting somewhere I could change to allow everyone to print. One more thing is that when I try to print test pages the PC says the printer is not detected/ set up, but yet the test page comes out, but it's only the top 2 lines. I did try to change time out settings, bidirectional...different things in the printer properties pages, but nothing really solved the problem. Any help would be greatly appreciated. Thanks!

1 reply

by brian

Try changing the bios and the port settings in the device manager to a unidirectional communication. Newer computers have 2 way communications with the printer. This type of port is an ECP port. An ECP port communicates like an lpt port but can also send data. It will still function when set to LPT but it will only send data. I believe Win2k may be seeking info from the printer but the switch only listens from one end. I hope this helps. Another option if these are networked is to simplyhook the printer to one of the machines and share it. Then install that printer on the other computer as a network printer.

This discussion is closed to new replies.