Networks

Ask something
Question Locked

2000 Server error code

0 helpful
5 replies

by bdmitinc

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client that says they were doing updates yesterday and the machine said that there wasn't enough room on the drive so he compressed the drive and now it blue screens with the error code
c0000263 Driver Enrty Point Not Found\SystemRoot\System32\Drivers\TCPIP.SYS Device Driver could not locate the entry point CTEScheduleDelayedEvent in driver TDI.SYS
I have serched this on the web but I have not found this exact problem, there are similar ones but they all involve video cards or D-Link cards. there was no new hardware installed on this machine. It won't do Last known Config and it wont go into safemode of any kind to remove or replace the bad driver. Anyone got some sugestions for me on this one? Formatting is not an option just so you know. This is on a Dell PowerEdge 2400 with raid 5 so it makes it difficult to pull the drive out and copy a new version of the file into Windows from another machine.

5 replies

by sgt_shultz

that was a Bold Move on that admin's part.
if you think RAID 5 is making it too hard to deal with the hard disk, you better get some experienced help.
I would call microsoft on this one. it'd be worth whatever they charge you.
you haven't mentioned if this is a critical server or not. if not, i would put another hd in the box, install the os again and use that to uncompress, then backup the original drive. then i'd put in a bigger hard drive and restore the original to it. maybe.

by bdmitinc

Yes it is a critical server. That is why formatting is not an option. They have a tape back up but this is the machine that does the back up. Without changing over all the scsi cards and installing the tape back up on another machine I can't even transfer the data. This server has an Adaptec scsi card in it for the drives and the back up. No other machine in the work envirnment has scsi any thing. Plus the back plane and scsi software is embedded in the Dell 2400. So I don't think I would be able to transfer the scsi stuff because I won't be able to load the software. By your comment about the RAID 5, I'm assuming that you feel that pulling out a drive and copying the file over would not be a problem? If not then how would you go about doing this. Remember that it is a scsi drive that would show up as a dynamic drive if I slaved it in to another machine and it would want me to convert it right away just to access the data. As far as I know, once that is done the raid won't take the drive back and rebuild from that drive. It would see it as a "new" drive and copy the mirror from the original drives still in the raid format. I have never had success doing that. Maybe I've been doing it wrong though.

by bdmitinc

No one has any clue about this? Been waiting for a reply all day.

This discussion is closed to new replies.