Discussion Locked

2nd NIC card in WinNT

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Kensington PCI adapter--Instructs touse IRQ 5 i/o 300. I can't free up those resourses. HOW DO I find what IO resourse touse with a particular IRQ. I would like to try either IRQ 7 or 11. NT does allow a 2nd NIC card, right?

Thanks,
Dale Hutchinson
dhutchin@birch.net

2 replies

by shanghai sam

Yes, NT allows a second NIC, but they must both use the same DNS Servers in TCP/IP. I ran into this when trying to set an NT Server up as a Gateway. I believe Win2K resolved the issue, but I haven't confirmed that.

by larry23

To find which I/O resources are related to which IRQ, use Windows NT Diagnostics.
Select the Resources tab to view IRQ's and their associated device. Select I/O Port to view which device uses which address range.

In regards to using IRQ 7, this is generally reserved for your parallel port (LPT1).

This discussion is closed to new replies.