First, figure out what type of connection the plasma requires. Then, look for a PC that has either that type of video connection OR at least one PCI Express slot for adding a video card (2 PCI Express slots would be better if you can find it). The PC also needs at least 2 regular PCI slots, one for future expansion. If the PC you purchase has one PCI Express slot, buy a video card that will accomodate the plasma connection first. If you can buy a card that has 3 connections, 1 for the plasma and 2 for the 19" monitors, grab it. Otherwise, buy a 2nd video card to accomodate the connections for the 2 19" monitors.
Upone boot, set the BIOS to use the PCI Express Video as primary. You may have to disable the on-board video to make it work (depends on what you buy). On first boot, use ONLY the plasma to get it up and running and all updates applied, software installed, etc... Once it's ready, plug in the 2nd video card and boot to get it recognized and drivers installed. Shut down and attach the 2nd and 3rd monitors. You'll have to figure out later which is left side and which is right side.
When you boot up this last time, right click the desktop (WinXP) and choose properties. Go to the "Settings" tab (I don't know where it's at in Vista). You should see 3 monitors in the drop down box. Choose the 2nd and 3rd monitors and click the box to "extend desktop to this monitor". You can then adjust the resolution of each separately. The plasma will always be the primary (the one with the start button on it).
To make an application window come up on the 2nd and 3rd monitors, start the application you want to show there, make sure the application window is not maximized, drag the window to the desktop you want it on, then maximize it. When it's closed, that application will remember where it last opened and reopen on that monitor the next time you start it.
One caution: Once an application is set to open on 2nd or 3rd monitor, if you later unplug that monitor and go back to using one without resetting the application first, you won't be able to find the window when it starts. It will be hidden.