4 replies
by cg it
PPTP pass through allowed on the SonicWall. port forward 3389 to the local LAN workstation IP address.
here's a MS link http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
here's a link for remote desktop client software
http://www.microsoft.com/windowsxp/downloads/tools/rdclientdl.mspx
by cliff680
You need to do the following on the Sonicwall. I am assuming that you are trying to get external access and have a static external address on the SOHO3.
1. Login into the SOnicwall and click on Access, then click on the Add Service tab. Under add a known service, select Terminal Services and click Add.
2. Click on the Rules tab (also in the Access section). Click on Add New Rule. Select Action Allow and select Terminal Services in the Service drop down. For Source select WAN and leave the address Range *. For Destination select LAN and trpe in the local IP for that PC under bioh the begin and end range. After you put this all in click on update.
3. You should see this new rule in the list of rules now.
You should now be able to RDP into that PC as long as you setup that PC to allow incoming RDP connections.
by cliff680
To get into the PC externally you will need to go to an external pc and launch Remote Desktopand type in the Sonicwall's external IP address followed by a colon 3389.
For example
65.65.65.65:3389
by orcsattheg8
Cliff,
If you have several hosts inside and want to allow RDP access to those hosts, do you have to create rules for each host with an associated port, or just one rule for all. If one rule for all, then how do you address the RDP connection using the SonicWall ext ip and indicate the internal host?
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending