Discussion Locked

386dx pc's to win95 Server

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
As i'm new to networking I'd like to know if I could link 386dx pc's to a win95-server.If it's stupid enough - help i'm drowning

7 replies

by butthammer99

If you have all the necessary hardware, NIC's, cables, etc. yes. And it would be fairly simple to do. A 386 will run Win95 given enough hard drive space and RAM, but it's going to be slow going.

by wzab1

Windows 95 can run on a 386DX, but it's not a dedicated server platform. It can provide service, though, to a Windows 95 (or Windows for Workgroups 3.11) based peer-to-peer network. If you install the Microsoft network client on the 386dx pc's, andthe Windows 95 PC has file/printer sharing enabled, the 386DX pc's will be able to see the file and/or printer shares offered by the Windows 95 box.

by tbradley

I think what you want to do is link 386's to a "peer to peer" network, where you can share file and printing with a Windows 95 workstation. The answer is yes, if you are
running Windows 3.11 ( windows for workgroups ) on the 386.

The other 2 options are to have a NT server, and connect the 386 via a dos based net login, which if you are the novice you say you are, is a tough row to hoe. The other way is to upgrade the 386 to win95, and then again, the answer is yes, but why. When you boot them up in the morning, they may be connected by the time you've had 3 cups of coffee and a half dozen donuts.

If you don't have 3.11, then the answer is "I wouldn't even go there"

This discussion is closed to new replies.