4 replies
by degshedd Accepted solution
by jpelectron Accepted solution
This may have nothing to do with the Hardware (HP Proliant Server ML350 G5) but more to do with the Software - what are you running on the Proliant server?
What is the make/model of the router?
You haven't told us enough information to provide an answer.
by degshedd Accepted solution
by gdeangelis Accepted solution
Did you update or at least verify it is current, the firmware on the board before you replaced it? That can be a problem.
Also, have you looked at the duplex settings on both the server and switch to which it is plugged in? Have you tried another device on the same switch port? What response do you get from a device elsewhere on the network to nbc.com? Don't rule out your existing cables just because there were there. They are often overlooked. Chech for errors on the switch or router port where your server is plugged in. Don't assume anything here either. Clear the counters then run your pings or access the internet and check again.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending