Discussion Locked

4GB of RAM

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi Folks,

I have a PC Intel P4 running Windows XP Pro. A few months ago I installed 4GB of RAM of which only 3GB was reported in Windows. I posted a question detailling my problem and was pointed to the PAE switch in the Microsoft Knowledge base website. This worked fine when I had Service Pack 1 installed, but the moment I installed Service Pack 2 the RAM went back to 3GB. I enclose the Boot.ini file:

[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /PAE

The Bios is reporting all 4GB of memory.

Any help would certainly be appreciated.

Tony Emm

5 replies

by master3bs

I thought that the 64-bit version of XP was required to fully access 4GB of RAM. Am I mistaken?

by stargateok

It is supposed to but, how can you use 64 bit when no programmers or device manufacturers will keep up with the needed drivers?

by wcp

BIOS flash might help

I had an ASUS MB whose BIOS read 4GB RAM but Windows showed as 3GB. I did BIOS flash and Windows showed full 4GB. I did not have to use PAE switch.

by stargateok

Seems like there are no solutions, only more questions tonyemm!

I have the same problem, only trying to get windows to see 8GB. My moby supports 16GB and during boot-up 8GB is shown, but not when you get to windows. I tried the supposedly current bios for my moby and all it did was lock my computer in boot. I had to re-flash the old bios. I guess no-one has a helpful answer.

This discussion is closed to new replies.