There are 5 USBs in Device Manager and one of them is enhanced. Enhanced PCI to USB Host Controller a kind of logical port and indeed it a Windows driver which basically drives USB 2.0 enabled devices on all the USB ports. If you look at your PC hardware then you must have only 4 USB ports (I am not counting front panel USB ports) not 5.
Also, If you have read USB FAQ article mentioned by Jacky Howe then following section explains why do you need that Enhanced Driver:
"Do I need to install drivers for my enhanced (USB 2.0) host controller?"
If you want to test this logic then you must disable other USB ports in Device Manager except the enhanced one.
You can do that as per following:
Device Manager > Select USB controller > Right Click on it > Click Disable
Once four USB controller are disabled then connect the device to each USB port one by one. You will see all of them should work. As it will be using Enhanced USB Controller. But if you disable Enhanced USB Controllerdriver and enable all other USB Controller then Windows XP displays an Warning saying
"This device can perform faster.if you plug it to a Hi-Speed USB 2.0 port"
So if you are getting above message then your Enhanced USB controller is corrupted or missing or not enabled for that particular USB port.
Enhanced USB controller make each USB port USB 2.0 compatible (if it is not). So it is a driver not a PHYSICAL port.
ALTERNATE FIX
If you want USB errors not to be displayed then
Go to Device Manager > Right Click on any USB controller > Click Properties > Click Advanced > TICK "DONT TELL ME ABOUT USB ERRORS" > Click OK
Good Luck...!