9 replies
by hockeyman
by waltervw
by bhaney
You have not given us enough information but here is where I would start:
1. Go to the machines that can not see anything and see if you have link lights on the network card and the hub. If you don't, you have a physical problem or possibly a network card driver problem.
2. If you have link light start pinging each of the ip addresses of the other workstations. If you get responses from any of them then you know your TCP/IP stack is configured correctly. If not, you need to reinstall TCP/IP and configure it correctly.
3. If you are pinging the other workstations but not seeing them in network neighborhood make sure you are part of the same workgroup (or domain) and that you have different workstation names. Try pinging by computer name. If you are resolving it to an ip address then you know that netbios is installed and working correctly. If not, try reinstalling all your network services.
by waltervw
by laerma
by waltervw
by rick.bigsby
Could be in your security settings.
by default sharing of disk resources and printers is turned off. You have to grant these resources. second is to confirm you are using the same workgroup.
As mentioned could be several other things
IP settings card settings etc.
by waltervw
by waltervw
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending