A challenge for the top 100 Come on guys lets step up
This is page 2 of the discussion. Read the opening post
After Hours
This is page 2 of the discussion. Read the opening post
by boxfiddler Hot topic
A startling array of possibilities...
Thanks for that. :D
by maecuff
You rebel, you.
Grow up.
:)
by nicknielsen
by ontheropes
by boxfiddler Hot topic
cuz there's no half and half bump.
Still thinking of lame things. ;)
by jiminpa
by boxfiddler Hot topic
by nicknielsen
by seanferd
by boxfiddler Hot topic
to build a new one. This one is 5 years old, processor and mobo, nic, internal fans, etc... One of the hard drives is a couple years older. Starting to see some odd processor usage patterns.
I've been putting it off, but I guess I better start shopping. :( I wonder how difficult it is going to be to get XP hardware and drivers. Bleah. Should have done it months ago.
then scrap it without installing all the way, and go with a 64 bit Linux system :D
Of course, any HW that Vista touched would need to be replaced again because it became corrupt :0
NP, a good learning exp :D
by boxfiddler Hot topic
and MS Office. Either on a partition, or under a virtual machine of some sort. Probably Virtual Box as it comes with Ubuntu. I do NOT want to spend money on Vista. Although, I probably should be running it to keep up with what we are doing at school.
Blech. All the same. DRM. WGA. NO! Don't make me! :0 :(
by hal 9000
all new hardware that you buy will come with XP drivers. Well the better stuff anyway. I don't know about those nasty PC Chip type M'Boards as I try to avoid them at every opportunity as they are complete rubbish.
M'Boards like ASUS, ABit, Gigabyte and so on all come with XP Drivers all the Video Capture Cards come with XP Drivers as well as all the things like Printers.
Sorry but I will not be around much for a few days/weeks depending on how the cousin does after having his stomach removed. I'll drop in on the Q Threads to wind down at the end of the day but I sort of have my hands full at the moment.
Then just to make my life so much easier [b]SWMBO[/b] broke her car today & I had to drop everything to go and rescue it. Apparently her car sitting on the side of the road with a broken distributer just isn't acceptable. Pity that the parts that I just had to have are still sitting at the wholesalers waiting for me to pick them up. ;)
Well I didn't want to do any work this weekend anyway. :D
Col
by seanferd
Let us poor humans have some dignity. :p
Pssst. Don't tell anyone, but I don't think hardware problems are hiding the avatars. ;)
by jiminpa
by nicknielsen
by jdclyde
does it count if I have a half day today and a half day monday? :D
Heading down to Rockford for a big Cross Country match. Starts first thing in the morning, so we are going down tonight.
I will sit in my chair and watch everyone race. Just wish I could have some tequila in my coffee.... ;\
by boxfiddler Hot topic
Where's the heads up?
Have I been a bad boxy not to remind people? (Just thought of it myself. Sheesh.)
by jdclyde
by boxfiddler Hot topic
by jiminpa
by jiminpa
The Starbucks here at the hospital just won't do it. I can get a half caf soy low froth latte in an environmentally friendly cup but I can't get a shot of Jamison in my coffee.
What is soy milk any way? How do you milk a soybean?
by boxfiddler Hot topic
I won't tell. What do you think is hiding the avatars? ;)
Bump.
by boxfiddler Hot topic
Western Digital hard drives. nVidia graphics. 3Com or Xircon for ethernet. Creative for sound.
Have I left anything out?
by nicknielsen
Uh-oh. Knew I forgot something.
Heads-up is here: http://tinyurl.com/5qhhnm
by boxfiddler Hot topic
am woefully unprepared, too. :( I'll have some fun with anyway. And I'll try not to BOO! people away.
It will be most difficult. :p
by ontheropes
by boxfiddler Hot topic
Here's the link. Will make another tinyurl, maybe TPTB are blocking those now?
https://www.techrepublic.com.com/5208-6230-0.html?forumID=102&threadID=272130&messageID=2576055
by boxfiddler Hot topic
by boxfiddler Hot topic
by boxfiddler Hot topic
Early Saturday client meeting bump.
How'd that happen? :D
by nicknielsen
or late, late, late Friday?
bump
by w2ktechman
by nicknielsen
by boxfiddler Hot topic
by hal 9000
ASUS are fine though I do personally prefer Gigabyte as they have a 3 year warranty but that's a personal thing I've used lots of ASUS Boards without any problems except on the AMD units where some Video Cards refuse to work but when you use the same Chip Set from a different Maker they do. This even happens with the same brand stuff with is annoying to say the least.
I once had a rash of ABit M'Boards and Video Cards that simply refused to work together though each worked perfectly well by itself.
I personally use Seagate HDD's as they come with a 3 Year Warranty and from past experience they actually format up slightly bigger may not be an issue but I just like them like that.
I've also had a couple of Creative Sound Cards that do not allow some AMD Chip Sets to Boot but this has always been related to High End Audio fitted to the M'Boards I still have a Audigy card here that has never been used as it just refused to work with one of the M'Boards and that at the time was top of the range but the main reason that I got it was because it had a MIDI Port which have all but disappeared now.
But the Big One here is the Nvidia Video Boxy currently Nvidia seems to have a design problem with some of their Video Chip Sets and they are failing at an alarming rate. Might be an idea to look at another Chip Set Maker for Video at the moment till things are sorted out as Nvidia has supposedly set aside $200,000,00.00 to fix the mess that has happened but all the media is claiming that this will not be enough so I personally do not see how Nvidia will continue unless they get bought out by someone much bigger who can carry the loss and fix the problem. Or at least carry the loss till the problem just goes away.
But if you do use a Nvidia Chip Set Video Card make sure to set it to keep very cool well the GPU at least as this seems to be the main problem the GPU constantly runs hot and then starts to break down. So make sure that the Video card that you get has it's own Fan and keep an eye on it as well as making sure that there is a lot of airflow thorough the case and Don't over load the GPU.
Also if you ever see a Zig Zag effect on the monitor power down and check the function of the GPU's Fan and check for dust blocking up the Heat Sink.
Col
by boxfiddler Hot topic
by ontheropes
by boxfiddler Hot topic
by w2ktechman
by ontheropes
by nicknielsen
by nicknielsen
by ontheropes
by boxfiddler Hot topic
when you don't share with your friends. ;)
Bump.
by nicknielsen
Haven't seen it down here. IBC is about it.
Belch...I mean bump. :D
by gadgetgirl
Grief.
30?
yeesh, we can do better than that.
Ok - thinking cap is on. Good job it's Bank Holiday Monday over here so I'm not at work. Taken tomorrow off too.
Had an idea. Just the one. Well, it's only 0748. Need to skype Soni ....
oh - and any pals and peers that you know haven't changed avatars yet, get kickin' at 'em.
We gotta do better than this: [b] THE TEAM NAME IS THE PINK RIBBON BRIGADE [/b]
Frustrated.
GG
by jiminpa
what's a brolly
?:|
by nicknielsen
by boxfiddler Hot topic
by nicknielsen
by nicknielsen
A reimage, a reseat the monitor power connection, a reprogram the bar code scanner, and a reconnect the network cable.
And 140 miles.
by w2ktechman
by nicknielsen
by jiminpa
by nicknielsen
by gadgetgirl
that doesn't work if you're viewing all posts......
:p :D
GG
by nicknielsen
by jiminpa
yesterday on the way home, someone kept swerving almost 1/4 - 1/3 in my lane (in front of me). I just wanted to pass the b!tch, but everytime I sped up, I had to brake again.
Finally coming up to the light she stayed in her lane. That is when I noticed she was texting in heavy traffic!!!
Light turns green, and I was able to pass by no issue, she didnt realize the light was green and that everyone in front and around her were moving.
I am glad that is the last I saw of the b!tch!!!
by nicknielsen
by oz_media
by oz_media
it just popped to teh top of teh forums list and i read it again, thinking someone was getting antsy about nobody using pink ribbons.
Can't wait until I get going on my black condom campaign and the studded arm band party.
by jiminpa
.. shows he has character :D
-Tammy :-)
by nicknielsen
by oz_media
Was just laughign teh other night about how I woule walk to work through Vancouver's Hastings street (years back) while wearing a pair of dress pants a silk tie and pastel pink shirt.
Hastings street is Vancouvers skid row, that's where all teh crack dealers, junkies, winos etc live on teh sidewalk.
Most people will go out of their way to avoid even driving down East Hastings, but there's no threat to anyone there. People can barely stand up and stagger to the next alley for a meal and a dump, yet alone attack anyone.
Yesm I was one of those, sexually confident guys, I wore pink shirts to biker parties if I went straight from work.
by w2ktechman
by tink!
These discussions involving Tig's campaign have been around for a few weeks now. When is/was the 3 day?
The last time I got involved with the pink ribbon avatar challenge it was for like a week or two. Just long enough for Tig to get a screenshot of the Top 100 with pink ribbons to take with her on the walk.
Plus she posted pics of the walk afterwards. I haven't seen any post-walk discussion yet. So someone please enlighten me. :) Have I missed it?
by w2ktechman
to get the attention of more peers and help spread the awareness.
Tig should be starting her blog in a couple of weeks on it.
by nicknielsen
The nineteenth through the twenty-wunth, to be precise.
And bump.
by boxfiddler Hot topic
by nicknielsen
And still under $4k. I done my part, how 'bout a little help?
Bump
by boxfiddler Hot topic
by jiminpa
by nicknielsen
by boxfiddler Hot topic
by nicknielsen
This one not only fell of the front page, it fell off the back page too!
Get thee up there!
by boxfiddler Hot topic
by w2ktechman
by w2ktechman
by ontheropes
by w2ktechman
however there is good reason for it. The first package would not install properly, then the second place I got it didnt have the updates or extra packages...
Finally after about 20 min, it installed, and I found updates and extras for it. Got it all installed, and started it up :)
But, I do not see a 'resize' command, and I spent about 30 minutes trying to figure out how to move the text box (layer2). Then it kept giving me errors about exporting first due to invisible something or another. After choosing OK, it agian told me I had to export it due to layers -- so I flattened the layers and saved it without issue
Posted it last night, but now I need new pics to play with. The ones that I started with last night need some work (stfu with red circle and a line through it).
I resized it on XP with no issue (used the 'resize' command), however the image was too small originally and it just blurs.
But since I dont know how to use the tools yet (and have avoided the manuals -- yes, bad idea) it is going slowly...
I dont know, I just cant keep an interest in it. I have never really been a graphics person, so it isnt in my top priorities to spend the time learning every in and out of GIMP for features that I would easily forget about.
by ontheropes
To resize go to, "Image/Scale Image". Break the chain if you want to change the image ratio.
Also, I just ignore those "error" messages. I've never had them screw up an image yet. Just make sure if you're saving a multi-layer gif that you save it as an animation, don't flatten it. You may get a transparency "error" message or "out of limits" message but as long as you save it as an animation you'll be just fine.
Last, but best, hint: If you're going to spend any time working on an image it pays to save everything to it's own folder. The GIMP seems to hang if you save it to your "My Pictures" folder and it's a real PITA! It eventually works right but you have to be patient.
Just because I feel like it-Which picture took me the longest? This one:
http://i268.photobucket.com/albums/jj4/sharewhat4/thET_av.gif
I made it from a larger image of this:
http://i268.photobucket.com/albums/jj4/sharewhat4/ScreenShot745.jpg
It's not as smooth as it could be but I'm sticking with it. I've got quite a few bits and pieces of that one. :) Have to show it off. I like it.
Almost time for a bonfire. All right!
by w2ktechman
Every time I tried to scale the image, it screwed it up, caused more blurs, and left the image whare it was AND moved it. Often cutting parts off (enlarging it and it cut parts out??)
I tried a text box, placed it, and it auto moved to a position I didnt want constantly. So after I got it positioned right I saved it and gave up for the night.
hmmm, mabe another go in a bit. If I tried right now, I might toss the NB across the room :0 (jk)
by ontheropes
by w2ktechman
I got a little inspired (from your post) and did a google search, found a new 'No Symbol' and put it in the GIMP. This time, I seemed to get it right AND I had figured out that after scaling, and accepting it, then the image works better (no double image). I guess I was more tired than I though last night. It seemed 'Easy' today..
Anyway, here is my first animated GIMPed image :D
![]()
by ontheropes
by w2ktechman
Tammy and Sonja aer going to have a field day with this one :0 :0
Hmmm, now I gotta figure out how to make the 'no symbol' blink, and just keep the STFU.. And how to control the timing. ANyway -- I think I'll play around with it a bit now. Thanks :D
Sort by Trending