Discussion Locked

A+, MCSE etc...

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What would be the best types of
certifications to get now a days?
I mean if you consider everything
out there the field is so broad
and it seems many of the certifications
have outlived their usefullness.
Which ones would you suggest and
where would you obtain them from?

6 replies

by tomsal

I think you need to be well rounded, and don't go with a cert to say you have a cert. Go with a cert that you'll actually USE in your job! I don't care if you have 40 certs, if you don't have the skills to actually put your money where your mouth is - there is no way myself (or anyone with half a brain) will hire you.

Today people get certs as bragging rights more and more and they don't know squat!

The bottomline is this - you said in your post "..it seems many of the certifications have outlived their usefulness.."

Certs don't outlive their usefulness unless two conditions happen:

(1) You really don't "use" the cert, got it just to add it to a resume and say "hey I'm certified". In this case, the cert isn't a cert in CCNA, MCSE, A+, etc. - it just became a certification that you got more answers right than you did wrong on a few tests.

or

(2) Your company/job no longer uses the technology or product you were certified in. If this is the case, the answers simply -get certified on the the new technology/product!

All I'm saying is, if you keep your skills up and you constantly keep on top of everything - that's how you give that piece of paper value, "usefulness".

If no one likes to keep learning and hasn't accepted in this industry you need to do constant re-training....well that person is in the WRONG freaking industry then...

I hear McDonald's is hiring... ;)

-Tom

by dragonnite

A Certification is a piece of paper that says you've taken a test to prove you know more then the average USER. Not always true, but you have a piece of paper. Certification can open some doors and make you more marketable. The certification becomes your reference and not some person at a perivous job who may no longer exist.

So try this site: http://mcpmag.com

This will have all the info you need, from what types af certifications there are to where to get training and certification testing. Good luck...

by studmuffin

I would suggest going down the Cisco path (CCNA,CCNP,CCIE) and complement it with a Red Hat Certified Engineer (RHCE) or a Sun Solaris certification, because I have heard Cisco shops run UNIX more than anything else, which makes sense if you think about it. Cisco dominates the Internet hardware market, and UNIX is still dominant in a lot of Internet based companies, and TCP/IP was originally a UNIX protocol I believe, so there's a lot of reasons why UNIX is attractive. I suggest Red Hat Linux because Linux is a growing trend, and I feel there will come a day that Windows may feel the sting of Linux in PC OS marketplace, if it hasn't already. If there is such a thing as an OS for Internet companies, I bet UNIX will still prevail, but Windows NT is catching up.

by jun1cez1

There's no such best type of certification that you or anyone can have but if you don't know your stuff or has no experience whatsoever, you won't last in the workplace or if you ever got one. Unfortunately, if you aren't certified, no employer willeven look at you and say You're hired.
As a startup recommendation to anyone who wanted to get in the IT field, start with A+ and learn and study then learn more and study more. Then when you think you're capable of going to the next level, its allup to you to make up your mind and go for whatever you want.
The types of certification you are asking could be anything that you think you will be capable of doing and whatever you will think that will best fit your future or current expertise.
The world of networking is so broad that it seems to be an endless road that even if you got there still will get you nowhere unless you keep on moving or say learning. With new technologies being implemented almost on a daily basis, you'll be amazed and even perhaps think twice before you even get involve with it. Its a damn long road. The choice always belongs to you.
Just a reminder, nowadays, even MCSE certifieds are being ignored for the simple reason that they can be certified without knowing or knowing too little of their stuff. But if you're capable of showing that you can do it, they i say go for any certification that suits you.
As a suggestion, in a higher level category certification, go for MCSE, Novell or Unix as they are themost widely implemented of all in the networking area or internet.
AND GOODLUCK.

by alex

It all depends on you, bud. What field area are you working in now? Are you wanting a cert to get your first job? What do YOU wanna do? Are you gonna pay for these yourself? (<-- big deciding factor)

If you are getting a cert to further your current job, then ge the applicable cert. MSCE is a microsoft specific cert for mainly their software and OS, giving networking knowledge as well. For hardware technician cert , A+ is a good one. It is a non-vendor specific cert, so it is good if you do not know exactly what area you will be in. Other non-specific cert is Network+ and Inet+. If you work more with specific vendors then there is Intel, Cisco, Unix, Novell, Solaris and other certs that will do for you.
A BIG deciding factor is $$. Most certs cost lots of money. Some companies are willing to foot the bill for your tests, if you are luckyenough. A very good starting point (the one I took) for someone that is starting out and will have to pay for eams on his own is Comptia Certifications (A+, Network+, and Inet+). They are non-vendor specific and best of all will not break your wallet(too bad anyway). These will give you some establishment to possibly get your foot in the door of a job that will pay for your higher certs. Youcan find out about these exams at www.comptia.org and schedule tests at www.2test.com.

Good luck

by joseph1

I think that since the IT market is so big you should first look at which skills and personal charchteristics you have. (Since I can't spell i didn't go into programing, you get it.)Then after you have assesed you real skills the one that you were born with find out which field of the IT is best suited for you.
That is probably the best way to do it since you will also enjoy doing what you do best.
Lots of luck

This discussion is closed to new replies.