Windows Forum

Ask something
Discussion Locked

A printer that works random

0 helpful
3 replies

by andy bettoni

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Lexmark M410 connected to a LAN with a NIC and a static IP Address to print packets from Unix programs and connetecd directly to a Pc via parallel port to print via Microsoft word documents. The printed is shared with another Pc in the lan using the driver Microsoft.
The print start to print by otself without any user request a couple of control character when a pc is turned on.
What can I check via software? The printer in properly configured via its panel and internal settings are all Ok.
There's a strange broadcast that I not founding...
Tks
Andy

3 replies

by chris

There is a switch in the properties to turn it off, If this is not the case then you will need to uninstall the printer and go to dos mode to regedit do a search for the printer information and delete them and then reinstall the printer from scratch.

This discussion is closed to new replies.