Discussion Locked

AAAAAAAAAAAAAAA!

0 helpful
33 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Primal scream

because I need to blame others for my internal conflict.

https://www.techrepublic.com.com/5208-12852-0.html?forumID=102&threadID=308021&messageID=3071840

Remote user, trying to walk him through changing the password on a DSL modem.

He needs to move his network cable for his PC so that it goes to the DSL modem instead of the Linksys box.

It took an hour so far to get that far....

JUST FOLLOW THE LINE FROM YOUR PC AND MAKE SURE THE OTHER END IS PLUGGED INTO THE DSL MODEM!!!

Fine, we finally got that far, now the DSL tech is trying to walk him through logging into the DSL box and now THAT isn't working....

AAAAAAAAAA!

This is killing me.....

33 replies

by jdclyde

Worse? how?

I haven't even gotten to the point of having to walk him through the sonicwall config yet!

oh the pain, the pain....

by seanferd

This individual is going to set up a Sonicwall by a walkthrough, and he can't even plug a cable into the right box?

I'd say, "Good luck, sir," but you know that look you get from everyone when they all know that you've just become expendable...?

"He was a good man."

by av .

Remote workers are just a nightmare if they're so inept they can't plug a cable in. I feel your pain. I once drove 2 hrs. each way to a remote office to plug a monitor cable in. They had it plugged in, but not all the way. :^0

AV

by shasca

Didn't you just come off of a two month Vacation? My but you wind up fast.

That's everyday around here. 100+ remote users working from home.

by jdclyde

Ok, we have the pc plugged into the DSL modem.

Can't plug into the DSL modem.

Got transferred to level two support, and found out because the modem is in Bridge mode, we don't NEED to and CAN'T log into it!

So, the last three level one techs for SBC were blowing smoke out their ass.

AAAAAA!

by notsochiguy

"So, the last three level one techs for SBC were blowing smoke out their ass"

As a result of my dealings with SBC support, I honestly believe they are blowing smoke while on the job. Just out of a different orifice, and after having inhaled it first.

Reach out and touch someone, indeed...they made me want to reach through the line and crush their larynx each and every time!

Glad to be done with them (for now...knocks on wood)!!

by cmiller5400

[i]they made me want to reach through the line and crush their larynx each and every time! [/i]

Bill Cosby did that in "Ghost Dad", it was hilarious!!!

by seanferd

You wouldn't believe what I had to go through to get what I guessed was a faulty mains w/ transformer replaced. (My guess was right, btw.)

Over an hour on the phone being repeatedly transferred and escalated, doing the same stupid tests I'd done before I called. (OK, I didn't actually repeat the tests every time.) Finally, speaking with a real tech at the router vendor, I made headway. It was easy with this guy, as he knew enough to be able to tell that I knew what I was talking about. Shortest conversation in the entire support call, that was.

No level at SBC had a clue.

by jdclyde

bought a proliant ml110 G5 series.

Well, turns out the piece of crap server is not compatible with the piece of crap easy-setup disk they send with the server.

and of course, the day before while on the phone I had to go through all the "gee, just put the disk in, stop chewing gum you idiot, and install it" attitude. When the tech got onsite the next day, same thing, until he tried it himself..... :D

It is now loaded, but the raid controller STILL has a blue question mark on it in the device manager (windows server 2008)

by mjd420nova

I got my DSL modem in the mail, I saw the AT&T truck in front of the house but no personal contact or guidance from anyone. I did have to pull a four wire line from the punch down box in the garage to a wall outlet near the server/router cabinet. Installed the splitter and plugged in the line to the modem. Switched the CAT5 cable from the cable modem to the DSL modem and installed the software. What's so hard about that? Aside from having to pull my own cable, anyone could have done it. When all else fails, read the destructions.

by jdclyde

Guess who is taking a road trip next week? Going to shoot for Tuesday.

Monday, will walk the more tech savvy person at the other location through this. We had it, but there was a problem with the cable modem, so it didn't connect. Will have to walk through this with the comcast support monday morning with a conference call.

After that is done, will move our servers to the new network, update DNS and test for the rest of the day.

Tuesday, road trip to the other location and get it going once and for all.

by seanferd

Woohoo! Ninja road trip!

Good luck. I hope they don't fsck you at the drive-thru. Comcastic!

by jdclyde

when I added, "What? Just boot to the setup disk......" as it was getting the same error message that I had TOLD him it was doing....

He realized it wasn't me being the retard, it was the crap HP product....

by jdclyde

the problem was the raid controller.

(his company sold me the server last week)

His solution was to sell me a raid controller instead of use the on-board controller.

I informed him he would be carrying the piece of crap back out with him before he would sell me a card to make the server work.

Clearly was used to dealing with people that just don't know better.

by seanferd

and the easy setup cd. Not compatible with the CD, not even compatible with its own hardware components. Sweet. I wonder if they sell many of these.

I see that the RAID controller is embedded. You think they'd have that bit down, no?

by jdclyde

had assurance from the vendor and quite a bit of savings cost wise.

If you count in labor for the two days I had to waste on that crap server, the IBM wouldn't have been so expensive. X-(

HP had a chance to turn me into a convert, and blew it.

by cupcake

You live and breath for this kind of challenge JD... that is, isn't it, why you get into this line of work?

From A - Z and it will be over soon.

by jdclyde

the cable came half out of the wall wart....

walked in, stood in front of the system for a second, grabbed the cable and plugged it in.

I looked at them and said "After years of training, I have found they work better if you plug them in".

Turned around and left.

Yes, I had told them to unplug and replug everything in BEFORE I took the trip.

by av .

It is just beyond frustrating that people can't even plug something in, but thats what you get. Its incredible. I always walk away asking myself how these people ever got through college.

AV

by seanferd

This is the DSL gateway?

And when you and probably ten other people asked that the mains and indicator lights be checked,... what?

...

So what's up with the Netware these days?

by jdclyde

the only thing it is doing is a login and a login script to setup mapped drives.

After I finish my project, that server is so toast.......

by jdclyde

Was a cable going from the WAN port to one of the LAN ports, instead of the WAN port to the DSL router.

Of course, the DSL router was all dorked up from last friday and had to be hard-reset and configured from scratch, but not until after SBC level one support wasted another 30 minutes of my life.

by seanferd

I meant the question as an obvious attempt at misdirection, but thanks for the amusing answer. :D

Just to login and map a drive? They haven't looked at this since Win 95, right?

This discussion is closed to new replies.