15 replies
by rob hogan
One last thing, if you have an solution that is rather extensive please be specific on the steps involved (you can email me specifics if you would prefer)
Thanks
by interdivide
You say you need access to the FILES on the SERVER via the INTERNET. You need a seperate IP address for this approach, but you probably have at least one more you can squeeze out of your current block. Install a telnet server on the machine you wish to access; several are available for download, take your pick based on price, features, # users allowed, footprint, complexity, etc. If you are willing to fork out the coin, you can buy telnet server apps that are idiot proof and install themselves. Then install a telnet client on the remote machine(s), TeraTermPro is free and probably adequate for your needs. That will give you access to the files just like you were at the local terminal. You can also use the browser on the remote machineas a telnet client. Get savy on the telnet IP addressing scheme, takes a couple hours on the net to learn what you need to get the server up, and you will be good to go. Now, of course, you informed the cable ISP of your new telnet server, since ifyou have heavy traffic coming in, they will discover it pronto. If its just you coming into the server then... They don't dig it, especially if they don't get their monthly cut, but you can look your contract over and see if telnet server is addressed. The best way is to approach them with your problem and work out a solution with them, unless they don't want to play and then you done put yourself under the light. If you know someone else with service from the same cable company, have them run the trial baloon up for you. i know some cable providers are not cooperative about telnet servers. However some don't specifically prohibit them in the contract. Its too handy though: a telnet server on your home machine and its as good as it gets, from anywhere with a decent net connection.
Security is as good or poor as you make it. rotate the IP address, and use protected access levels.
by rob hogan
-Get yourself a public IP address
-VPN to the server (setup VPN on the w2k server and your client)
by rob hogan
by worf
Rob,
Unfortunatley for you, even with the Telnet application described, you will still need either access to you firewall or to have the cable companies technicians access it for you. You see, in order to make an inbound connection through a NAT firewall, of any kind, you will need a static NAT translation of an external, registered IP address to an internal Private one. And that is assuming you have the right type of firewall. You never mentioned what Firewall product you have, but if it isstrictly PAT based, like older versions of MS Proxy Server, you will not be able to do a static inbound NAT translation. PAT appends a port address to the same IP address for all clients. This works outbound, but not inbound. And the fact that you say the Porxy doubles as a web server leads me to believe that it is a PAT based product. What you need is a registered IP address not in use, that can be staticlly NAT'ed to your internal machines private IP address. There is no way around this fact. The NAT could be done on a router, if you have one on your external network. At that point, assuming your cable company allows GRE on the wire, then you can set up PPTP, a free VPN server on NT 4.0 and access your internal network, or do the telnetidea mentioned above.
by rob hogan
by rob hogan
by rob hogan
by rob hogan
I strongly recommends you to get a valid IP public address.
Set up a VPN using W2k with two lan cards, one for the public ip address (internet) and the other for the private ip address (your lan, clients that access the database)
Using a VPN you will obtain the most secure connection between your remote clients, as well as a good shield against hacker attacks.
On the other hand, the second nic card will allows you to access this server from the lan side, and of course in you need, browse theinternet by installing a proxy server (or better the new isa server.)
good luck!
by rob hogan
by christotg
This may not be a valid solution for you - but try getting rid of the proxy server. Set up NAT with a small hardware firewall (Sonicwall, Netscreen, etc) or a computer based product like Win2k RRAS, freesco, or linuxrouter.
If it is something youwant to do, but you can't get authorisation for it, try this: Ensure you have a minor project that an executive wants, but make it fail or delay it due to the cable company controlling the proxy.
by rob hogan
by rob hogan
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending