Question Locked

ACER T160 X64drivers

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all,

I have a aspire T160 AMD64 processor, Acer FC51GM Motherboard Chipset nVIDIA GeForce 6100.
I have installed DUALBOOT with Win 2k3serverx64 and Win2k8serverx64.

Issue is that all works fine on 2008 but on the 2003 I get 2 error on device manager:
Other PCI Brigde Device
SM BUS Controller.

Plus when I visualiza webpages its slow when scrolling giving impression it's something wrong with the VGA or nvidia drivers. Does anyone has used this installation before?

Does anyone knows where I sort this out?

Thanks

8 replies

by larbakium

Hi,
yes I tried but no luck they only have drivers available for x32 of win xp and I am looking for 2003 x64

by oh smeg

Download the Unknown Device Identifier from here

http://www.zhangduo.com/udi.html

Boot into the 2003 OS and install it then run it and locate any Unknown Devices and then visit the Acer Web Site as listed above and download the required drivers and install them.

Col

by larbakium

thanks. I try it out but no much luck. After installing could not run with a "Priveledge instruction".
I believe its because I use 2003 x64 but how to works around I do not know..

by oh smeg

And look for any hardware without installed Drivers. Of course if you had a list of the Hardware for this unit prior to installing any unsupported OS it would be easier but you can do it the hard way.

Look at the installed Hardware in Device Manager and compare this to the list of 32 Bit Drivers available from the Maker. Make a list of the available drivers and then do a Search for the remaining undisplayed Drivers in the 64 Bit OS.

That should get you out of problems though it will take longer. ;)

Col

by larbakium

Hi thanks for you help.
i found out this computer has a onboard network card that was disabled because I couldnt find drivers for w2k3x64 therefore I got another network card and installed the drivers. Now when I installed w2k8x64 in dualmode i notice that this additional network card does not work and i cant find drivers... BUT the onboard NIC works with w2k8x64... so what I did??
Add 2 network cables.. and when I boot w2k3 works fine with additional network card. when i boot w2k8 workswith the onboard one...
So far so good as the extra network connection is not a issue.
I know its not much of a great solution.. but it works.

by oh smeg

And open the Network Adapters and make a note of the Network Card Listed there.

Then do a search for 2003 Drivers for your OS 2003 64 Bit though the same drivers that work with 2008 should work with 2003 so you could insert the 2008 Install Disc with thew 2003 OS running and then Open the Device Manager select Update Drivers and point the installer tot he 2008 Install Disc for the driver.

Col

This discussion is closed to new replies.