Discussion Locked

Activating a HDD

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do i make one partition of the HDD Active and the other dormant? Also, what would be the effect?

1 reply

by thechas

The "active" partition on a hard drive is a bootable partition. Typically, this is the Primary DOS partition on the primary master hard drive.

You can still access, but not boot from non-active partition.

By default, the primary partition on a slave drive is NOT active.

Typically, you set up the partition structure using fdisk or drive manager (XP).

With fdisk, by default, you are allowed to create 2 partitions.
A primary DOS partition (the bootable or active partition)
An extended DOS partition. (non-bootable)
In order to use the space in the extended DOS partition, you must create logical drives.

The FAT standard supports up to 4 (?) primary partitions on a hard drive.
Typically when you set up additional partitions, you hide the partitions that are not in use (active) for the present configuration.

1 common use for this is the hidden "recovery" partitions on many laptops and retail PCs.

Chas

This discussion is closed to new replies.