Discussion Locked

Add an IP printer port to a remote PC

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there any way to add an IP printer port to a remote PC. The remote PC is running NT 4. I have an IP printer I need to add to 30 PCs in the office, I would rather not have to goto each one to add the IP port, all the machines are running NT4 SP6. I know this can be done in 2000, but can't seem to figure it out in NT.

8 replies

by mackem

Have you tried the Net use command in a login script. This should allow you to add it too as many users as necessary.
Hope this helps.

by aschaffer

I can't add the TCP/IP printer port using net use. Well atleast I haven't been able to figure out how to add a port with it.

by stromn

You can add an IP printer by adding the service "Microsoft TCPIP Printing" to the PC that is serving that printer. Then add the port to that PC by Adding a Printer and then selecting Add Port. You can then add an LPR Port. Then you share this printer and all the other PCs can attach to it.

by davjoe

Hi
This solution might help but it involves a little bit of registry work. Firstly if the PC's you want to add an IP port to already have an existing IP port that is not being used,you can edit it. Using regedit connect to the remote PC's and editthe following key.. HKey_Local_Machine\System\CurrentControlSet\Control\Print\Monitors\LPR Port\Ports ,select the relevant port and change the IP. You will also have to remotely stop and then restart the spooler service using server manager manager for each PC. You will then have to tell all your users to choose this port by choosing printer properties and ports.

If your PC's do not have an existing IP port you can edit you will have to use this method. On your own PC create the relevant IP ports that each PC will use. Using regedt32 backup the PORTS key (Same location as above)then stop the spooler service on each PC before restoring the key to each remote PC, restart the spooler after. Again you will have to tell users to select the relevant port for their printer.Maybe you can use a batch file to help with stopping spooler service.

This solution does work remotely but involves a bit of work. Maybe if you only have 30 PCs it would be quicker to do it manually???. Anyway test it out on one PC first and see what you think.

Hope this helps.

This discussion is closed to new replies.