Discussion Locked

Adding a CPU

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just added a second CPU to my NT Server 4 machine and NT is not picking it up. Is there some utility I need to run to get NT to see it?

5 replies

by glenn.r.cate

Look at MCP magazine, July 2000 edition in article "Moving Seamlessly from One Processor to Many". Douglass Dickerson gives a complete answer on how to do it. He references a TechNet article Q156358 which you could also reference, but my experience with using the MCP article worked perfectly. Just be careful of the registry edits and you will have no problem with the O/S picking up the second processor.

Glenn R. Cate, MCSE, CCNA
glenn.r.cate@fpc.com

by lewey04

Microsoft has a resource kit utility called uptomp.exe that you can use. OEM's like Compaq and IBM also have utilities that ship with their servers that can do the same thing.

Also check out the following Technet articles:
Q156358
Q124541
Q148245
Q142660
Good luck and hope this helps.

This discussion is closed to new replies.