Discussion Locked

Adding wireless laptop to network

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a stadard 10/100 network of two computers and a hub (Linksys). I recently got a used 266 notebook (Dell) that I want to add to the network, but I want it to be wireless. I was all set to get a Linksys PCI adapter (WDT11) to my main computer and a PC card (WPC11) to the notebook. But the guy at Best Buy said I'd have to have the (WAP11) "Instant Wireless Network Access Point" if I wanted to surf the net also?? Is that true? (FYI: I have an external ADSL modem that connects to the PC via USB) I had thought I could have just used some proxy software to make the shared net connection....

Linksys' site is not at all clear on this. I was wondering why I would need the the WAP11 at all unless that was a receiver both the PC and the Notebook would need as a hub. And would that be a conflict for my traditional network, i.e., should I just go all wireless?

Thanks

3 replies

by tbradley

I agree, it is rather confusing, but if you look at it logically, it makes sense.
View Wireless as you would a "ham" radio. You have 1 transmitter/receiver ( your laptop ), but at the other end, you must have another transmitter/receiver tuned to your frequency that you can talk to. (wireless access point)

This wireless access point has an RJ-45 port to connect to your existing hub, and can serve up to 4 devices I believe. Both your network and the internet use TCP/IP protocol to talk backand forth, but there must be a "physical" connection between your laptop and the internet. This is ADSL modem - hub - Wireless access point - ( wireless.... ) - wireless PC card.

This discussion is closed to new replies.