Discussion Locked

airlink router on westell 6100 modem

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can I configure westell 6100 verison dsl modem to work with airlink Mimo XR router?

3 replies

by ihlei

I just saw this post.

Basically, you'll need to configure the Westell 6100 in bridged mode.

Go here:
http://members.verizon.net/~res08lyg/6100.htm

to see step by step instructions on how to configure the Westell in bridged mode.

Depending on where you are in the Verizon network, you're either going to get your IP address via DHCP or you'll need to log in using PPPoE.

by mobilemee

I have had good luck with connecting routers to the Airlink Communications Ravens-- but I got tremendous help from the engineers at USAT corp-- www.usatcorp.com -- we piloted a number of different routers (Linksys, dlink, etc.) but not a westell. USAT wa svery well versed on this line-- so we have used them for a number of projects-- I believe the fellow that helped us last with the Airlinks was Rich-- hope this helps.

by mobilemee

One other thing-- we also had carrier struggles because of the pseudo static IP of some carriers-- so we bounced from Cingular, to Sprint, and even Verizon-- but then back to Sprint. USAT was very helpful making it through these pains-- so get someone good to help with this pains-- because they need to really understand the carriers!

This discussion is closed to new replies.