11 replies
by lemmonr
by mckaytech
The thought of coax makes me shudder but you might get away with it using Thicknet.
Depending on what sort of network access is needed for the 2 PCs, a simple modem over twisted pair setup might work nicely.
On the other hand, if there wouldbe a possibility of putting a repeater about halfway, conventional Cat5 wiring would be within it's design limits.
If this building will also have phones, you might consider VOIP as a means of justifying the cost of fiber because you could run phones, computer and everything else over the same cable.
The final alternative would be a wireless system of some sort (either microwave, IR, laser, etc.)
paul
by its a secret
fibre can keep up with company growth. coax no way. I would go fibre or wireless. Do you have an unobstructed view between buildings? if so wireless would open many more choices.
a couple of mini opticle bit drivers 300-500 each the fiber run and you are up and running.
by wlbowers
ISDN Modems would work. Just make
sure you use a GOOD surge suppression
on the lines. You can get them with
routers built in. Motorola, 3Com. would be
a suggestion. Motorola has a good
DSU/CSU setup you might want to look
into. This would be faster and provide
some expansion.
Good Luck
Lee
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending