5 replies
by smarthomefocus Accepted solution
Hi domtab,
This is something that I was able to create in 15 minutes with SmartThings and webCore (a community SmartThings app). These are the products I used:
1. https://www.smarthomefocus.com/smartthings-home-automation-app-hub/
Allows you to connect your smart home devices and build automations.
2. https://www.smarthomefocus.com/review-smartthings-motion-sensor/
Allows you to monitor motion and TEMPERATURE
I also used the SmartThings community webCore app, which really allows you to build any automation you want with your smart home. The webCore app uses a simple if this then that approach to building your automation. To test your request, I built a simple automation that does the following:
IF Motion Sensor Temperature > 72
THEN Turn on Fan (You would use your WIFI switch)
WAIT 5 Minutes
THEN Turn off Fan
Let me know if you take this approach and if you need any help getting things setup.
Thanks,
Jason
by khalil.khabibullin Accepted solution
Home Assistant is the kind of open source home automation hubs - very active community and rapid development.
You will need the Raspberry Pi or another home server to install it, but it is generally much more flexible than Smart things in my opinion.
Example of Hardware you can buy to start:
https://smarthome.university/first-250-on-smart-home/
by maxime28 Accepted solution
by fiona g Accepted solution
Just made a research and find the Aqara official website, but no way to find the thermostat from this brand. Also searched the aqara thermostat and there are some results on google. Can't understant why the brand doesn't present its full range of products.
Was there something wrong from my research?
Here's what i found: https://www.aqara.com/us/home.html
by alexanealessia Accepted solution
This discussion is closed to new replies.
Trending Emerging Tech posts
Sort by Trending