8 replies
by jfuller05 Accepted solution
by ic-it Accepted solution
the camera and mount, makes and models.
Have you inspected the camera and mount to verify they were manufactured to move?
Is gv Net the software to control the camera?
by jfuller05 Accepted solution
by older mycroft Accepted solution
I doubt if anyone in this company actually know what camera it is.
Before you spend multiple hours of wasted time you ought to organise some form of retrieval for this camera. If nothing else, if it hasn't moved for a while, exposure to the elements could have caused seizure of the motorised parts.
Better to ascertain that it can move and will behave by reacting properly to commands, while tested in laboratory circumstances before remounting it two storeys up in the air.
by oh smeg Accepted solution
I would be looking at physical Damage to the actual Affected Camera as the first option not a Software issue.
Also if it was originally a Software Issue and the camera has been there for a long period of time not moving it could have seized up. It's not uncommon particularly in a Polluted Environment.
Remember that Vehicle Exhaust Gasses these days after lead was removed from fuel emit H2SO2 [i]Rotten Egg Gas[/i] which combines with water in the atmosphere and comes back as H2SO4 or [i]Sulfuric Acid.[/i] This is fairly detrimental to most mechanical devices that are constantly exposed to the elements. ;)
Col
by jfuller05 Accepted solution
by oh smeg Accepted solution
by older mycroft Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending