Discussion Locked

ARcserve 7 Installation Problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We purchased Arserve 7.o. backup software. It seems running in our server without any error messages. When I tried to do a backup from my workstation, it said Arcserve cannot detected another netware server. It seems like manager in my workstation is not connected to the server but we cannot figure out what is wrong. Thank you

5 replies

by jimbb

On esupport.ca.com there is a servicepack and a patch to download that fixes this and other things, like not being able to browse remote servers from within the ARCserve client and so. There's no installation program with it,you'll just have to replace some files in various ARCserve directories (mostly NLM and Manager).
You may have to register to be able to download...
The files to look for are:
Qo05996.CAZ
Qo07656.CAZ
And you'll need the "unzip" for CAZ files, which is CAZIPXP.EXE (on the same download page).

Also, are you using IP or IPX on your workstation? This URL may be the solution to your problem as well:
http://support.ca.com/techbases/asnw7/SNW0002.html
(remove spaces if they show up). You may have to edit a registry key on your machine to get a connection.

Jim

Jim

by wlui

Jim, thank you very much for your reply. I tried to edit the registry but it did not work. I did 1B according to the Arcserve tech support site that you gave me. Why my workstation does not detect the backup server? If you have other ideas, please let me know. Thank you. Wendy(wlui@brearley.org)

by bob the builder

This has just happened to me. We have Novell 5.1 server and Arc7. WorkStation manager not working. In the end Support PAck 4 for Novell installed. Re-installation of Arc7 on the server and then the latest patches for Arc 7. We had to do it in that order as nothing else would work. Our Novell consultant was extremely reluctant to go Novell Support PAck 4 but it was the only way. We also had a trouble ticket out with CA but they couldn't resolve it. Once we proved this method we then appliedit to our other 5.1 boxes and they now work OK.

by shanghai sam

Bob, thanks for your reply. I think your problem with Arcserve was more than a problem that I had. Jim, Actually the solution you pointed out to me should work but there was a step missing which was it should be click decimal instead of hexdeimal for step 1B. Well, we bought the five incident package because it was driving me nut to figure it out. The first tech I got was telling me to download netware client 32 for windows and he did not even asked me what was the problems so I told him. I could not understand him very well because of his English speech. I did not take his word and I did my research so I called again. The second tech I got was better. At least, he asked what was my problem with Archserve. In conclusion, he walked me through with the step in 1B and other things also. Now my arcserve manager can detect the server. Thanks to both of you.

This discussion is closed to new replies.