Discussion Locked

ArcserveIT and Netware 5

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently upgraded my Netware server to Netware 5. Now I am facing problems with the ArcserveIT backup. Backup jobs remain active and cannot be removed. Nothing is wrong with the Hardware and Tapes are erased properly. Backup jobs hang the server.

7 replies

by rpdf

have you upgraded your Novell ARCserveIT components? specifically the Backup Agent for Open Files. the backup agent for netware has to be 6.6 or better, I believe.

by dbarker

First check is to make sure you unload nwtape.nlm, as ArcServe uses another tape driver. Do ASTOP6, unload nwtape, then ASTART6. Also download and install ALL the updates for ArcServe from CA's website. I ran into a similar problem when I updatedand a changer driver fix corrected the problem in my single tape system. CA will be glad to work with you on the problems at $95 each episode. They helped me through my trying times so don't hesitate. Backups are too important!

by wayne

Have you service packed ArcServe to the latest version? When we first went to 5.0 had the same problem as well as Abending the server whenever you cancelled a job. After applying SP's all worked as normal.

This discussion is closed to new replies.