Discussion Locked

Asus A7V with Matrox G200 AGP

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A computer tech has just installed an Asus A7V. After he left the computer kept crashing and no games would run. I have taken out Voodoo2 3DAcc card, so, no more crashes! As far as I can see the Matrox card does not fit correctly in the AGP slot, ie. it is impossible not to insert the tab at the end. Dx8 always freezes when I try to run AGP texturing tests. (worked fine with P3 motherboard, unfortunately it got zapped by power surge!)I have reformatted, reinstalled Win98and updated drivers. Don't know what to do next?

5 replies

by dmiles

The A7V board has to slots,one is AGP and AGP PRO,the matrox card should seat in the specified AGP slot,and seated properly for it to work,so try one or the other and then test the system,the driver update is not going to help if the card is not in the proper slot,call the tech back for assistance.

by atty

There is only one slot, but there is a plastic tab that you leave in for non PRO boards. If I move the board over either way it will not fot the box and I will have to replace all other boards.

by dmiles

This dillema may have to be solved by purchasing an adapter for the board or getting a new board to fit the slot.The fingers have to inserted in properly.

This discussion is closed to new replies.