Discussion Locked

Automatic shutdowns of all work stations

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I asked this once before but did not get the response I needed. I need to SHUT DOWN ALL work stations on a LAN at 4:00 pm every aft. and 9:00am every sat and sun. The computers all run winnt4 and are all able to power off.
The server- Win NT server4 and resource kit but the schedule software in it is too memory hungry and I have to enter each and every computer. Is there a better way? or am I just beating my head against the wall.
DON't tell me to go to each workstation and enter commands. NO way!
Don't reccommend 3rd party software unless it is cheap or free! I've paid too much now.
Don't tell me to switch operating systems.... same reason
Microsoft MUST have a way to shut down all stations at once.... I would think.

Thanks
Frustrated
Merv

5 replies

by fstrooper

I think you can try the following method:From: MrEhere
Date: 08/24/00 12:00 PM EDT
Status: Not Rated
Points:

(As posted on BrainBuzz.com)

Use WinAT.exe and the Shutdown.exe from the NT Resource kit. Make a batch file with 'shutdown.exe/reboot' in it and use the WinAT console to schedule when to run this batch file.

If you checkout the download section on thethin.net, there is a reboot.zip that has all these tools and more utils for cleanup.

by joncr

If you want to shut them down fully - not reboot I assume try this:

1. Copy shutdown.exe from the reskit and a small batch file (detailed below) to the clients local hard drive.

2. set the AT commands to run a batch file containing only this line at that time:

\shutdown.exe /T:120 /Y "Your PC is shutting down. Save all work and close your programs imediately!"

This is a safer shutdown. If anyone is still
working they will get this message and a two minute countdown. Also any errors in closing applications will be answered yes. ("Program not responding" boxes etc will be closed.
This is the safest method of using shutdown.exe and the solution is free.

This discussion is closed to new replies.