3 replies
by ajhudnall Accepted solution
by bart777 Accepted solution
If all you are doing is increasing the size of the disks and array, just use the built-in NT backup program.
You may not even need that. In some cases, with some RAID controllers you can increase the size of the array via the BIOS setup without destroying the array.
If this is not possible all you need to do is backup the server to some location, upgrade the drives, install a base 2003 OS and then run a recovery back to the same location.
Best of luck.
by selltekk Accepted solution
How are you trying to backup and recover the directory structures?
Symantec backup exec would work fine. If you don't have the licenses for it already, I assume that any major backup suite would do the trick.
If you don't have proper backup software and don't want to spend the money in getting some (which would probably be a good idea anyway), just get a BIG external USB HDD and copy away...
Is the domain controller your file server as well?
Really, your best bet would be to have 2 drives in the array mirrored to hold the AD structure, OS and applications, then 3+ drives in a RAID 5 array for storage and shares. that way you could backup the storage array, replace the disks, configure the logical disk and restore.
If everything is in one array (OS, AD structure, applications, shares, storage, etc...) then you really should invest in good backup software and a tape drive or autoloader. That way you can back up the system state as well as the file structure and AD structure. Once all is backed up to tape properly, you can replace the disks, configure logical disks in the raid array controller, load windows, install back up software client, and then restore from tape.
Or, image the system with Ghost or some such, replace disks, and restore from image.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending