Discussion Locked

Bad Nic

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What are some signs of a bad nic or about-to-go-bad nic?

9 replies

by poettone

There are only few sign that will point to chipset burnout on a nic card. Some are unable to configure one time then work the next. Being able to recieve but not transmit and vice-versa. The lights (if so equipped) not functioning properly or at all. The one I call toast when you know that you know thgat you have the right drivers and free resources and memory addresses and it will not recognize either itself or the drivers. Or maybe it will seem to install but not work, then drop its protocolsand the list is extensive. Hope this help you.

by drdon

Look in Monitor, WAN/LAN Statistics and under Custome: Failure to Tx/Rx runt packets increasing. Check the switch port for errors Frame Check Sequence errors. Check the lights on the NIC. Usually, your users will notice slow performance or problems with a download and alert you first. Also, you can use IPXCON to check some of the performance issues.

by budnelson

Go to the Console, turn 'track on". Watch for a broadcast storm(repeated requests from the same MAC address).

by pmcd

Reboot system. (or power down and up) If you do not have a solid green light and flashing amber light; the NIC is probably defective.

This discussion is closed to new replies.