3 replies
by dheupel
Usually, when a modem does not answer an incoming call it is one of four things, in this order:
1) The modem is not set to Auto Answer
2) The modem is not detecting the ring, perhaps a loose silver phone cord
3) The modem is faulty/defective
4) The phone line is not wired properly - very unlikely
Have you ever been able to dial-up these remote sites? If so, suspect the modems have gone bad. If not, suspect that the modems are not configured or plugged into phone line properly. USR modems are notoriously susceptible to going bad due to voltage spikes on the telephone line common with lightning strikes.
Good luck.
by mightyidle
The answer was very good, but all of the solutions listed have already been tried. The modem has been replaced and its dip switch settings have been verified via USR tech support. The phone service provider has also verified that the lines are fully functional.
Any additional input you might have would be greatly appreciated. Thanks for answering.
by mightyidle
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending