Discussion Locked

BDC can not find PDC

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Our HQ in PA is controlling the PDC and I have a BDC. HQ changed out it's PDC with a new machine, they have the same IP but changed the name of the box (?). I edited the lmhost file on the BDC to reflect this change. I am still unable to locate the PDC. The BDC is running WINS. I can map to other servers and ping the PDC by IP but not by name.

9 replies

by ronnonf

I believe you are correct with thinking the problem was WINS related. Did you add the #PRE #DOM:Domain entries into the LMHOSTS file? Did you flush the NBTSTAT cache (NBTSTAT -R)?
Is it possible there is a typo on either side?

by elrodt

Come to find out the PDC IP was also changed. Wins is running static mappings. Changed mappings to new name & IP of PDC and edited lmhost. Everthing back up and running. Thank you for your help. Turns out to be lack of communication from the top.

by bstrang

If the new PDC is not showing in WINS, you may want to add a Static entry in the WINS database for the server. There may also still be an entry for the old server there.

by elrodt

Come to find out the PDC IP was also changed. Wins is running static mappings. Changed mappings to new name & IP of PDC and edited lmhost. Everthing back up and running. Thank you for your help. Turns out to be lack of communication from the top.

by azizhakim

The entry on your remote pdc is not configured.you need to configure your pdc with the entry of your bdc with the usual #pre etc.etc.Essentially by pinging your connectivity is not the problem.Then is name resolution.good luck

by elrodt

Come to find out the PDC IP was also changed. Wins is running static mappings. Changed mappings to new name & IP of PDC and edited lmhost. Everthing back up and running. Thank you for your help. Turns out to be lack of communication from the top.

by ctpalmer

If the PDC was changed and the NT software reinstalled then a new SID was generated. The Domain SID (security Identifiers) need to match the domain SID of the BDC. This is why you can ping the server all day long but can not attach to it. There are utilities that allow you to change the SID of a machine. You might also want to check the technet article Q178009 - Renaming a Domain, Process and Side Effects.

by elrodt

Come to find out the PDC IP was also changed. Wins is running static mappings. Changed mappings to new name & IP of PDC and edited lmhost. Everthing back up and running. Thank you for your help. Turns out to be lack of communication from the top.

This discussion is closed to new replies.