Discussion Locked

beeping erros from cards slot

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
my pc is not working and it has beeping sound and i cannot manage to work with it how can i trouble shoot it?

2 replies

by retro

If you have the documentation that came with the system, you may be able to find out what the beeps are telling you. You could also contact the manufacturer.

by cyborg

The first place I would start would be to replace the memory if it is readily available. If that does not cure the problem, take the cover off (unplugging first of course) and disconnect all your hardware (cd-rom, dirves, etc) from your motherboard.Witout anything connected reboot your system. If you do not receive the beeping code, then shut it off again and one-by-one reconnect the hardware until one of the pieces causes the beeping. However, if when everything is disconnected that you stillget a beeping noise, and you've tried new memory, then your system board probably has to be replaced.

Good luck

This discussion is closed to new replies.