Discussion Locked

Benway Net

0 helpful
178 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
blog root

178 replies

by jason

I'll have to check this out when I get back.
An update to iShadow Desktop technology preview - 1.6.0.0 is available.

This universal ICA-RDP client (some features are yet to be enabled) has multi-window and multi-monitor support. Was tested with 40+ concurrent sessions and is a good candidate for benchmarking TS and Citrix deployments (has to be wired for benchmarking). I Like it. See more news on iShadow Desktop here.

Download iShadow Desktop 1.6.0.0 here.

[Via Thincomputing.net]

This post originally appeared on an external website

by jason

Some VMmware reading.
Experts in the community have written new books about VMware:

The VMware Workstation 5 Handbook (Networking & Security) by Steven Warren
VMware ESX Server: Advanced Technical Design Guide by Ron Oglesby, Scott Herold
Virtualization with VMware ESX Server by Al Muller, S. Wilson, D. Happe, G. Humphrey.

More here.

[Via Thincomputing.net]

This post originally appeared on an external website

by jason

I had an interesting question asked of me today, and I had to spend some time looking into it, so I thought I'd share the result of that with you.
As you know, adprep is used for preparing Active Directory to include Windows Server 2003 domain controllers. It comes in two flavors:

adprep /forestprep
Which is, of course, run once per forest, and

adprep /domainprep
Which is, of course, run once per domain.
Forestprep
The forestprep process creates a new container named:

CN=Operations,CN=ForestUpdates,CN=Configuration,DC=<VAR>ForestRootDomain</VAR>
Each operation executed by adprep/forestprep causes a new GUID-named container object to be created in the above container.
If you are upgrading from any version of Windows 2000 Server to Windows Server 2003, and adprep/forestprep has completed successfully, then the CN=Operations container will have 36 of the GUID-name objects contained within it. If you are upgrading from a beta or release-candidate version of Windows Server 2003 to the released version, you may have as many as 43 of these objects.
If there are fewer than 36 objects, then adprep/forestprep failed somewhere along the process. You can compare the list of operations and GUIDs in the Microsoft KB article 309628.
Domainprep
Similar to forestprep, the domainprep operation also creates a new container:

CN=Operations,CN=DomainUpdates,CN=System,DC=<VAR>DomainName</VAR>
but unlike forestprep, domainprep also creates a second container:

CN=Windows2003Update,CN=DomainUpdates,CN=System,DC=<VAR>DomainName</VAR>
which contains a single attribute of interest CN=Revision.
The CN=Operations container will contain 50 updates (up to 55 if you are upgrading from beta-releases).
If all 50 of the operations are completed successfully, then the CN=Windows2003Update container will have its Revision attribute set to 8 (eight).
If the CN=Revision attribute is not eight, then each GUID in the CN=Operations,CN=DomainUpdates container may be examined to determine where adprep/domainprep failed. The list of these is also given in Microsoft KB article 309628.
Fun Fact
All of the non-schema updates that happen as a result of running adprep are executed on the domain controller which holds the infrastructure master FSMO role.
[Via Michael's meanderings...]

This post originally appeared on an external website

by jason

Marketwatch: Microsoft buys VoPI provider Teleo.
Ahh, this is the tool I saw at Demo and I said it's a potential Skype killer.
It hasn't turned out to be that yet, but this sure is interesting news. I didn't know about it, by the way. I have some inquiries into our mergers and acquisitions department to see if they can tell me more.
[Via Scobleizer: Microsoft Geek Blogger]

This post originally appeared on an external website

by jason

I was glad to see that we have a KB article stating this.? (Very well written, Nino...)? It is a very lo-o-o-ng title:? "Exchange 2000 Server and Exchange Server 2003 performance may be affected when desktop search engine software is running on Outlook or other MAPI client computers"The article does a good job of explaining under what circumstances you will see the issue.? This is yet another good reason to run Outlook in cached mode in your organization.? Also included is a link to the ExMon tool to identify who?are the culprits.?
I use the MSN search tool?exclusively now and love it.? But I also know that I am running in cached mode, so I know that I am not causing any issues with my Exchange servers.? Excellent.
[Via Gerod Serafin's WebLog]

This post originally appeared on an external website

by jason

I know this is a beta version, but since the forums aren't used too much, look like its time for an update. I'll let you know when I've installed it so you can give it a try.
The first RC1 of pnForum 2.5 is available for download now. This version requires .760!

pnForum is a fully integrated forum module using pnRendertemplates for visualizing data. It uses the PostNuke permission system and supports all kind of transform and display hooks.

[Via pnModules]

later,jb

This post originally appeared on an external website

by jason

I can't wait until we get all of our users on the Exchange 2003 server and give this a try!
This has come up a number of times, and I actually thought I'd blogged about it in the past -- but I guess not.
If you have users that only use POP and/or IMAP, and never log into via Outlook/Exchange or OWA Premium, then those users do not get notified when their password is about to expire.
You can write a script that sends your users e-mail when their passwords are about to expire. The script below is based on a Scripting Clinic article available here, with?some bug fixes and enhancements.
This script, with a few changes and enhancements, is also in my upcoming book from O'Reilly: “Essential Exchange Server 2003“.
'' exch-pwd-expires.vbs'' Michael B. Smith' March 21, 2005'' This program scans all users in the Users container and all organizational units' beneath the HOSTING_OU organizational unit, for users whose passwords have either' already expired or will expire within DAYS_FOR_EMAIL days.'' An email is sent, using CDO, via the SMTP server specified as SMTP_SERVER to the' user to tell them to change their password. You should change strFrom to match' the email address of the administrator responsible for password changes.'' You will, at a minimum, need to change the SMTP_SERVER, the HOSTING_OU, and the' STRFROM constants. If you run this on an Exchange server, then SMTP_SERVER can ' be "127.0.0.1" - and it may be either an ip address or a resolvable name.'' If you don't have an OU containing sub-OU's to scan, then set HOSTING_OU to the' empty string ("").'
?Option Explicit
?' Per environment constants - you should change these!?Const HOSTING_OU??= "Hosting"?Const SMTP_SERVER??= "127.0.0.1"?Const STRFROM???= "emailadmin@your.domain"?Const DAYS_FOR_EMAIL??= 15
?' System Constants - do not change?Const ONE_HUNDRED_NANOSECOND??? = .000000100?? ' .000000100 is equal to 10^-7?Const SECONDS_IN_DAY??????????? = 86400?Const ADS_UF_DONT_EXPIRE_PASSWD = &h10000?Const E_ADS_PROPERTY_NOT_FOUND? = &h8000500D
?' Change to "True" for extensive debugging output?Const bDebug???= False
?Dim objRoot?Dim numDays, iResult?Dim strDomainDN?Dim objContainer, objSub
?Set objRoot = GetObject ("LDAP://RootDSE")?strDomainDN = objRoot.Get ("defaultNamingContext")?Set objRoot = Nothing
?numdays = GetMaximumPasswordAge (strDomainDN)?dp "Maximum Password Age: " & numDays
?If numDays > 0 Then
??Set objContainer = GetObject ("LDAP://CN=Users," & strDomainDN)??Call ProcessFolder (objContainer, numDays)??Set objContainer = Nothing
??If Len (HOSTING_OU) > 0 Then???Set objContainer = GetObject ("LDAP://OU=" & HOSTING_OU & "," & strDomainDN)
???For each objSub in objContainer????Call ProcessFolder (objSub, numDays)???Next
???Set objContainer = Nothing??End If
??'========================================??' Add the number of days to the last time??' the password was set.??'========================================??'whenPasswordExpires = DateAdd ("d", numDays, oUser.PasswordLastChanged)
??'WScript.Echo "Password Last Changed: " & oUser.PasswordLastChanged??'WScript.Echo "Password Expires On: " & whenPasswordExpires?End If
?WScript.Echo "Done"
Function GetMaximumPasswordAge (ByVal strDomainDN)?Dim objDomain, objMaxPwdAge?Dim dblMaxPwdNano, dblMaxPwdSecs, dblMaxPwdDays
?Set objDomain = GetObject("LDAP://" & strDomainDN)?Set objMaxPWdAge = objDomain.maxPwdAge
?If objMaxPwdAge.LowPart = 0 And objMaxPwdAge.Highpart = 0 Then??' Maximum password age is set to 0 in the domain??' Therefore, passwords do not expire??GetMaximumPasswordAge = 0?Else??dblMaxPwdNano = Abs (objMaxPwdAge.HighPart * 2^32 + objMaxPwdAge.LowPart)??dblMaxPwdSecs = dblMaxPwdNano * ONE_HUNDRED_NANOSECOND??dblMaxPwdDays = Int (dblMaxPwdSecs / SECONDS_IN_DAY)??GetMaximumPasswordAge = dblMaxPwdDays?End IfEnd Function
Function UserIsExpired (objUser, iMaxAge, iDaysForEmail, iRes)?Dim intUserAccountControl, dtmValue, intTimeInterval?Dim strName
?On Error Resume Next?Err.Clear
?strName = Mid (objUser.Name, 4)?intUserAccountControl = objUser.Get ("userAccountControl")
?If intUserAccountControl And ADS_UF_DONT_EXPIRE_PASSWD Then??dp "The password for " & strName & " does not expire."??UserIsExpired = False?Else??iRes = 0??dtmValue = objUser.PasswordLastChanged??If Err.Number = E_ADS_PROPERTY_NOT_FOUND Then???UserIsExpired = True???dp "The password for " & strName & " has never been set."??Else???intTimeInterval = Int (Now - dtmValue)???dp "The password for " & strName & " was last set on " & _????DateValue(dtmValue) & " at " & TimeValue(dtmValue) & _????" (" & intTimeInterval & " days ago)"
???If intTimeInterval >= iMaxAge Then????dp "The password for " & strName & " has expired."????UserIsExpired = True???Else????iRes = Int ((dtmValue + iMaxAge) - Now)????dp "The password for " & strName & " will expire on " & _?????DateValue(dtmValue + iMaxAge) & " (" & _?????iRes & " days from today)."
????If iRes <= iDaysForEmail Then?????dp strName & " needs an email for password change"?????UserIsExpired = True????Else?????dp strName & " does not need an email for password change"?????UserIsExpired = False????End If???End If
??End If?End IfEnd Function
Sub ProcessFolder (objContainer, iMaxPwdAge)?Dim objUser, iResult
?objContainer.Filter = Array ("User")
?Wscript.Echo "Checking company = " & Mid (objContainer.Name, 4)
?For each objUser in objContainer??If Right (objUser.Name, 1) <> "$" Then???If IsEmpty (objUser.Mail) or IsNull? (objUser.Mail) Then????dp Mid (objUser.Name, 4) & " has no mailbox"???Else????If UserIsExpired (objUser, iMaxPwdAge, DAYS_FOR_EMAIL, iResult) Then?????wscript.Echo "...sending an email for " & objUser.Mail?????Call SendEmail (objUser, iResult)????Else?????dp "...don't send an email"????End If???End If??End If?NextEnd Sub
Sub SendEmail (objUser, iResult)?Dim objMail
?Set objMail = CreateObject ("CDO.Message")
?objMail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing")????? = 2?objMail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver")???? = SMTP_SERVER?objMail.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25?objMail.Configuration.Fields.Update
?objMail.From???? = STRFROM?objMail.To?????? = objUser.Mail?objMail.Subject? = "Password needs to be set for " & Mid (objUser.Name, 4)?objMail.Textbody = "The active directory password for user " & objUser.userPrincipalName & _????" (" & objUser.sAMAccountName & ")" & vbCRLF & _????"will expire in " & iResult & " days. " & vbCRLF & _????"Please change it as soon as possible." & vbCRLF & vbCRLF & _????"Thank you," & vbCRLF & _????"Your email administrator"
?objMail.Send
?Set objMail = NothingEnd Sub
Sub dp (str)?If bDebug Then??WScript.Echo str?End IfEnd Sub
[Via Michael's meanderings...]

This post originally appeared on an external website

by jason

Anyone ever had much success getting their patches integrated into their RIS images? We've always just used SMS to push out the patches after the RIS but our folks out in the field don't like waiting up to an hour for everything to come down. And until we had the ITMU, it might need to reboot a few times during the process.
Tim Mintner and I recently played around with a few new ways of pulling it off but ended up resorting to just using a batch file that installs all of the critical patches. It just gets called at the end of the RIS process. This is better but I've seen some articles on some other methodologies that have piqued my interest.
1. http://support.microsoft.com/kb/828930/?- This explains how you can use the “/integrate” option to integrate a hotfix into an image.
2. A lot of people seem to be using RyanVM's update Pack in conjunction with nLite.
The thing is, Tim and I couldn't get it to work. We tried following some step-by-step directions but the RIS would fail whenever we tried to?install a new workstation. Although I'm not sure that we did actually follow every step exactly so maybe it was our own fault. It sure seems like what we did should have worked though.
So has anyone played around with these and gotten them to work with RIS? I haven't actually tried using these processes to create a normal boot CD install. If I find some time, I might try that to see if it is just RIS that is causing the problems.
[Via myITForum Blogs]

This post originally appeared on an external website

by jason

I don’t know how many e-mails I’ve received asking me about alternative solutions to commercial CD and DVD burning applications like Nero and Roxio, so I’ve finally decided to put together a short but sweet list of free applications so you can create your own CDs and DVDs at home. Read on for the full list, and yes, I’ll be doing Mac and Linux versions of the roundup soon.

Burnatonce- the basic installation lets you burn CDs without restrictions, but if you want to burn DVDs, you’ll need to install a separate shareware application (probably to avoid legal problems). With Burtatonce, you can create audio and data CDs. It supports burning ISO, CUE, and TOC images, and best of all, will automatically convert FLAC, MP2, MP3, OGG, and WAV files to audio CD.
CDBurnerXP Pro- this is the solution I used for a long time before going back to Nero, and is one of the best, in my opinion. Not only can you create audio, data, and video discs on both CDs and DVDs, but it will also rip CDs, convert different disc image and audio formats, lets you create covert art, and more. I highly recommend this solution.
DeepBurner (Free version)- a pretty good solution for creating audio and data CDs and DVDs, with a nice Windows Explorer-like interface. The free version is only available for personal use.
GUIs for CDRTools- this is not really one program, but a collection of small programs which act as frontends to the free, command line CD creation tool, CDRTools. Easy Burning is one of the best, and easily integrates into Windows 98 or higher, offering basic burning tools. The page has other tools available, like ISOBurn to burn ISO images to CD.
ISORecorded Power Toy- Windows XP has basic CD and DVD burning capabilities, but you cannot burn ISO images, which is where this tool comes in. The original version works great, but works only on Windows XP with up to Service Pack 1. There are other versions available for Service Pack 2, but I’ve had trouble getting them to run properly.

[Via TipMonkies]

This post originally appeared on an external website

by jason

Use a Windows Mobile Smartphone or Pocket PC phone?? If you also are in an Exchange environment, you need Microsoft Global Contact Access.? You’ll also need Exchange 2003 with a valid web access email account.? With this, you can:

Search Global Address Book lists
Schedule meetings with multiple recipients
View Free/Busy schedules of potential meeting attendees
Send email to anyone in the Global Address Book list without needing them in your contacts
I’ve been using it for the last couple of months and being able to see everyone’s free/busy time from my phone has been a?great addition?to have for scheduling meetings.
You can download it here.
[Via myITForum Blogs]

This post originally appeared on an external website

by jason

This article provides a detailed list of tools available for troubleshooting Citrix environments. Many of these tools are not made by Citrix and their use is not limited to Citrix-related problems. The document is divided into two sections: Citrix Tools and Third Party Tools. Many of the tools listed are installed during either the Windows or Citrix installations. Any Citrix tool that is not automatically installed is either included on the installation media or is available to download from the Citrix Knowledge Center Tools and Resources page. The third party tools listed are generally available for download from the manufacturers’ Web [more ...]
[Via Thincomputing.net]

This post originally appeared on an external website

by jason

Great news! The long-awaited ability to use standby Exchange clusters is finally completed testing and documentation with its addition to the Disaster Recovery Operations Guide: http://www.microsoft.com/technet/prodtechnol/exchange/guides/DROpsGuide/2493c2d6-618c-4c49-9cb1-fff556926707.mspx
This is one of those topics that has come up again and again over the years, and there was never any good (supported) solution for it. Well, over the past few months the Exchange team went through all the requisite testing and documentation, and now this is a fully-supported DR solution!
What does this mean? It means you can now recover your clustered Exchange 2003 EVS to a totally different cluster server (potentially in a different physical or AD site, with different IP, etc). See the updated DR Ops guide for more details.
[Via Evan Dodds - Microsoft Exchange Server Blog]

This post originally appeared on an external website

by jason

Is anyone interested in Jokes? Should I add this module to the site?
It had been snowing for hours when an announcement came over the high school intercom:
"Will the students who are parked on University Drive please move their cars so that we may begin plowing."

Twenty minutes later there was another announcement:
[Via pnModules]

This post originally appeared on an external website

by jason

This looks sweet. I just wonder about licensing of the software running in the VM?
Brilliant stuff! VMware Player is free software that enables PC users to easily run any virtual machine on a Windows or Linux PC. VMware Player runs virtual machines created by VMware Workstation, GSX Server or ESX Server and also supports Microsoft virtual machines and Symantec LiveState Recovery disk formats.

Run any virtual machine
Run virtual machines created by VMware Workstation, GSX Server or ESX Server. VMware Player also supports Microsoft virtual machines and Symantec LiveState Recovery disk formats.

Revert To Previous State
Revert virtual machines to a previous 'clean' state within seconds.

Access Host PC devices
Use host CD/DVD drives, network adapters, [more ...]
[Via Thincomputing.net]

This post originally appeared on an external website

by jason

In my work over the years I've noticed that I usually use the same tools when dealing with Server Based Computing environments. I've decided to bundle all the tools that I frequently use into an "installer" package called Thincomputing.net Tools. The Thincomputing.net Tools package download is about 4MB in size. All tools should run on Windows XP, W2k and Windows Server 2003.

Update: at the request of Mark Russinovich I have removed the sysinternals tools from the Thincomputing.net Tools package due to distribution restrictions.

Read more and download here. Be sure to read the readme in the installation folder!

[Via Thincomputing.net]

This post originally appeared on an external website

by jason

Often times a document or spreadsheet is not compiled by a single person but rather requires input for multiple people. In Excel, you can create a shared workbook and store it on the network so it can be edited by the necessary users. This way each person can add information to the same workbook instead of having to maintain multiple spreadsheets. You can create a shared workbook using the steps outlined below:…
Direct and Related Links for 'Excel’s Shared Workbook Feature'
[Via Lockergnome's Windows Fanatics]

This post originally appeared on an external website

by jason

Microsoft released a bunch of new tools on November 2nd.? Along with PFDAVAdmin, which I mentioned the other day, they have released the following tools:?

1.? New version of Exchange Best Practices Analyzer (ExBPA).? The new version is version 2.5 and includes some enhancements and additions to both the UI and the database.

2.? A new tool called the Exchange Server Performance Troubleshooting Analyzer Tool (ExPTA).? At first glance, this would appear to be a tool to help admins determine root causes for performance problems.? It will be able to gather perfmon counters, tracing information, etc. and then analyzes that data to present information on what the root cause could be.? It seems like this functionality could be compared to tools such as Quest's Spotlight for Exchange.? Though obviously more advanced, Spotlight allows admins to see potential bottlenecks and act accordingly.? Still, it's nice to see Microsoft release a product that does some of this natively.? I don't think it's meant to serve as direct competition for 3rd party providers of tools like these such as Quest.? It's kind of like comparing NTBackup to 3rd party backup tools.? NTBackup works, but it doesn't have some of the value-add functionality that 3rd party software companies can provide.

3.? Another new tool called the Exchange Server Disaster Recovery Analyzer Tool (ExDRA).? This should be a great tool for Exchange admins to have in their toolkit.? According to the overview on Microsoft's website, it will basically gather configuration data and header information from both the databases and log files, then analyze that data and give you a list of problems as well as?instructions on how to resolve the problem.? I see this as a tool that is meant for the seeming trend of less-experienced Exchange admins.? However, it's a tool that should be beneficial to any Exchange admin, even the most experienced ones.? I know I'll definitely try it out.

You can find these tools on Microsoft's site at the following location.? http://www.microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx

In addition, the Exchange Team blogged about these new tools here.? My feed reader (IntraVnews) didn't pick up that post for some reason, so this may be old news to you.
[Via A Collection of Random Thoughts]

This post originally appeared on an external website

by jason

I've been searching for a way to allow a non-admin on Windows XP to change the network settings (IP address,subnet,gateway,dns,etc)
Well I was search for a solution I found this blog posting about a nice little script that will make a user an admin, start a new process with admin rights, then remove the user from the admin group. Its using runas, so to be really usefull I need to find a way to script in the admin password (encrypted)

Also I still have not been able to find a way to have a non-admin user change network settings. If you found a way, please let me know.

Thanks,jb

This post originally appeared on an external website

by jason

What's a blogcast? As Eileen Brown said it:

"It's a mini Webcast, typically about 5 minutes long, and shows a visual demo of the technology. Audio is embedded along with the .WMP file and you can view this on demand over and over again. It differs from a podcast in as much as a podcast is audio only, and has enclosures that means that you can subscribe to a podcast feed to receive updated audio broadcasts when they are available. Blogcasts (cast out, from a blog, typically) show short targeted demos and they're visual. Some have PowerPoint, some only show the interface..."

Eileen has been posting blogcasts in this series for a while now and this particular series is now complete. Here is what is covered:

[Via You Had Me At EHLO...]

This post originally appeared on an external website

by jason

So, as promised yesterday, here are a collection of the resources and documents I talked about during the Exchange Unplugged tour gig in London yesterday
BlogCast: Populating Active Directory using the Active Directory Migration Tool (ADMT)
Blogcast series on upgrading to Exchange 2003
The Active Directory Migration Tool Overview (originally written for Windows 2000, but the concepts still apply...)
The Active Directory Connector
See you in Coventry on Monday :-)
[Via Eileen Brown's WebLog]

This post originally appeared on an external website

by jason

A great new download form Doug Brown's site: If you want to backup all your Citrix published applications and have them restored or migrate then you will want to download the Citrix Easy Backup Manager. Simply install it and then click the backup button to export and the restore button to import and the rest is down for you. I?’m very impressed, it is simple and easy and thus a must have!

Download it here.

[Via Thincomputing.net]

This post originally appeared on an external website

by jason

I hope Verizon offers an upgrade to the samsung i730
On our Exchange Unplugged Tour - I've had lots of questions from customers about what they have to do to get Push Email with Windows Mobile 5 devices.
I have to re-iterate that you need two components:
1) Exchange 2003 Service Pack 2
2) Windows Mobile 5 devices that have AKU 2.0 integrated - all new devices from Q1 next year will have this integrated however existing Windows Mobile 5 devices will need an upgrade - you need to check with your OEM/Operator on when they will have an upgrade.
From an infrastructure perspective you have to deploy Exchange Server Activesync - there is a great document on our website that describes step-by-step how to do this -
http://www.microsoft.com/windowsmobile/business/strategy/exchangemobilemessaging.mspx
Once you have that in place then all you have to do is:
1) Upgrade your Front End Server to Exchange 2003 Service Pack 2 - you do NOT need to upgrade all the Back-end servers.
2) You then need to extend your ISA or other Firewall timeout from it's default of 120 seconds to 1800 seconds (30 minutes) - the reason for this is that the Push Model needs the SSL connection to stay open (but not using data) for >15 minutes to support the Push Model.
Many customers are about to hit change freeze for the Christmas period so if you want to take advantage of this in the future it's important to make those changes ready for when the flood of devices appears early next year!
?

[Via Jason Langridge's WebLog - MR Mobile!]

This post originally appeared on an external website

by jason

These are some great tips, now that we are on our last stages of our exchange 2003 migration.
I noticed that this flash tip has been highlighted on TechNet recently, and how very appropriate and timely as i've had 2 mails this week about this very topic.? Susan wanted to know how to grand acces to someone elses mailbox, and Claire wanted to know the difference between send on behalf of and send as...?
This is the best article I know of?explaining the differences between Send as and send on behalf of, and should sort both Claire and Sue out at work.. Good luck!

[Via Eileen Brown's WebLog]

This post originally appeared on an external website

by jason

Microsoft is releasing some usefull free tools for exchange.
I've been so busy out on the road at IT forum,? then out of the country on holiday and now out on the road with the Exchange Unplugged tour (here's the tour blog by the way) that i havent had any chance to keep up to date with anything at all, so I've been dealing with the backlog of stuff for the past 2 weeks.? Fortunately Blake has reminded me of the new set of support tools for Exchange Server that ave been released, and he gives a good explantion of what each tool does.? I've also blogged?about features of each tool too...?

[Via Eileen Brown's WebLog]

This post originally appeared on an external website

by jason

Jesper M. Johansson, Senior Security Strategist in the Security Technology Unit at Microsoft published 2 Technet articles on “How to Shoot Yourself in the Foot with Security”:

How to Shoot Yourself in the Foot with Security, Part 1The objective is to help you better understand some of the things we do to provide security, and how they may break things unless we are really careful in how we use them.
How to Shoot Yourself in the Foot with Security, Part 2: To ACL or Not to ACLThe "verbification" of our languages is a wonderful thing, isn't it? ACL is just one of the recent additions to the powerful list of new verbs we have available to us. ACL stands for Access Control List. However, you have probably heard people use it as a verb, in the context of "you need to ACL the boot partition so Everyone can't get to it."
[Via Donna's SecurityFlash]

This post originally appeared on an external website

by jason

As the author of a bunch of books on Unix and shell script programming (most recently Teach Yourself Unix in 24 Hours and Wicked Cool Shell Scripts) I see a lot of interesting questions about how to be more efficient with the Unix / Linux command line and how to do neat things in shell scripts. In fact, I have an entire category on my weblog all about Shell Script Programming if you’re really into…
unix linux shell script programming
Direct and Related Links for 'Cool Linux command line and shell script tricks!'
[Via Lockergnome's Linux Fanatics]

This post originally appeared on an external website

by jason

We've spent 2-3 trying to get activesync and http-rpc working though ISA. Maybe this tool will help us, I'll give it a go on Monday.
While checking my RSS feeds noticed that Susan Bradley has bloged about Microsoft releasing the Microsoft Exchange Server ActiveSync Web Administration Tool....(read more)
[Via ExchangeIS]

This post originally appeared on an external website

by jason

Robert Petruska and Ulli Hankeln did it again.
Robert Petruska created a bunch of great Windows GUIs for many famous VMware utilities.Ulli Hankeln reversed the VMware virtual hard disks (.vmdk) structure, creating a lot of incredible utilities. Among them there is a batch for producing new VMware virtual machines configuration files (.vmx) called vmx-builder.cmd.
Why should you need producing new .vmx files from scratch? Simple: to create new virtual machines with VMware Player without installing VMware Workstation trial.If you wanna know more you better read my previous post and come back here.
Now Robert and Ulli worked together and produced a Windows application easier than ever to creat new .vmx files: the VMX Builder.
Please note that this utility isn't connected with the online VM Builder.

[Via virtualization.info]

This post originally appeared on an external website

by jason

by jason

by jason

Well, we run Trend and Mcafee on our Email, but CA Etrust on the desktop... So I have mixed feelings. Monday should be fun.
The latest flaw in Windows handling of WMF images files has highlighted some of the differences between Anti-Virus detection rates. With multiple variations of the exploit in action Anti-Virus vendors are struggling to keep up. www.eweek.com is running a story listing how each of the major Anti-Virus applications perform against the current known lists of variants.

The following detected all 73 versions of the exploit :-

Alwil Software (Avast)
Softwin (BitDefender)
ClamAV
F-Secure Inc.
Fortinet Inc.
McAfee Inc.
ESET (Nod32)
Panda Software
Sophos Plc
Symantec Corp.
Trend Micro Inc.
VirusBuster.

And the rest listed against how many versions detected :-

62 — eTrust-VET
62 — QuickHeal
61 — AntiVir
61 — Dr Web
61 — Kaspersky
60 — AVG
19 — Command
19 — F-Prot
11 — Ewido
7 — eSafe
7 — eTrust-INO
6 — Ikarus
6 — VBA32
0 — Norman

We hope your Anti-Virus solution is located in the TOP list.

Source: www.eweek.com
[Via bitByte : IT news, reviews & opinion]

This post originally appeared on an external website

by jason

i've been looking for something like this for awhile.
Folder Size is a nice little freeware application that adds a new column to the details view of your windows explorer displaying the size of every folder that exists in the current directory. Its mighty helpful if you want to clean your hard drive. It shows exactly which folders contain the biggest files and its always a good idea to start cleaning there.
[Via gHacks]

This post originally appeared on an external website

by jason

Lightweight, easy-to-use, and easy-to-learn tools for the hobbyist, novice, and student developer. The Express Editions are lightweight, easy to use, and easy to learn developer tools for hobbyists, enthusiasts, and students. Professional developers may want to evaluate the Visual Studio 2005 languages, including Visual Basic and Visual C#, using the Express Editions. Most professional features of the Integrated Development Environment are not present in the Express Editions, however. Express Quick Facts….

Direct and Related Links for 'Microsoft Express Editions'
[Via Lockergnome's Windows Fanatics]

This post originally appeared on an external website

by jason

The Patriots where just screwed. They got called for pass interference in the in zone. I'm going to be pissed if that call cost the them the game. Its still early, but still. It was a VERY crappy call.

The NFL needs to have a new rule next year that no hair can be sticking out from the helmet.

jb

This post originally appeared on an external website

by jason

Check this out.
MS Research has made their experimental Group Shot photo editing tool available for people to play with
"So?"
Okay..? let me explain what it does. Let's say you're at your brother Carla's wedding in San Francisco last November, and someone has used your brother Paua's really really nice digital camera to take several photos of your three families plus Grandma and Grandpa. Problem: Your little niece, who ordinarily is adorable and agreeable in every way, decides that she's not going to be in the mood for a photo at this very given once-in-a-lifetime moment. In fact, here are the various shades-of-niece we had to deal with:

[Via Full of I.T.]

This post originally appeared on an external website

by jason

I receive a lot of questions around Group Policy. One of the more common questions is about how to locate a policy in the large (and growing!) list of policies available. The good news is there is a nice reference spreadsheet that MS makes available for download here. Load this Excel spreadsheet and you can locate different policies easily and simply. It has seperate tabs for different administrative templates, Security Settings for Win 200o and also for Win 2003/XP.
?
Cheers!
[Via Stewed Prunes...]

This post originally appeared on an external website

by jason

This guy had a seagate hard drive that was reporting bad sectors and he found some software that can repair bad sectors if it is not a physical defect! Read On....
Prior to calling Sun?support for a new HDD (described here), I decided to give a utility called HDD Regenerator as shot.? The author of the software states that "Almost 60% of all hard drives damaged with bad sectors have an incorrectly magnetized disk surface" and that they "developed an algorithm which is used to repair damaged disk surfaces".
Sounded a bit far fetched to me...the hardware guy in me says software can't fix something wrong with failing hardware.??Regardless?I downloaded the demo that would repair the first sector and quit.? Remember that I mentioned that the Seagate utils were detecting a bad sector, but couldn't repair or move it.? I knew exactly where it was on the disk since I ran the tool several times.? I ran HDD Regenerator and sure enough it spotted the same sector and "repaired" it.? Hmmm....Back to the Seagate utils, it scooted right over this sector and continued on it's merry way checking the rest of the disk.? I was psyched and plunked down the duckets for the full version.? 9 hours and 100 repaired sectors later I have a disc that fully passed both the Seagate and Microsoft disk utilities.? Very cool.?
?

[Via Sun Ray Blog]

This post originally appeared on an external website

by jason

Security Configuration Wizard (SCW) is an attack surface reduction tool for members of the Microsoft?? Windows Server™ 2003 family with Service Pack 1 (SP1). SCW determines the minimum functionality required for a server's role or roles, and disables functionality that is not required.

SCW guides you through the process of creating, editing, applying, or rolling back a security policy based on the selected roles of the server. The security policies that are created with SCW are XML files that, when applied, configure services, network security, specific registry values, audit policy, and if applicable, Internet Information Services (IIS).

The Security Configuration Wizard documentation set [more ...]
[Via Thincomputing.net]

This post originally appeared on an external website