15 replies
by mazeea1 Accepted solution
by thumbsup2 Accepted solution
[b][u]Do not respond to this thread.[/u][/b]
We, the members of TechRepublic - A Resource for IT Professionals, will not assist anyone in the recovery/removal of lost passwords. You may have a legitimate reason to recover/remove a password. However, we cannot verify your motives and will therefore not assist anyone in what may be an attempt at gaining unauthorized access to a computer system. Due to the open nature of this forum, any assistance given to help circumvent security measures, even for legitimate purposes, would be available for unscrupulous individuals to use for illegitimate purposes. This is a risk that we, the members of TechRepublic, [b]will not take[/b]. Please do not ask questions of this nature on TechRepublic.
If you have a legitimate need to circumvent a password scheme, please contact the vendor for the software / hardware and request their assistance. E.g. Windows XP password recovery/removal issues should be taken up with Microsoft's technical support, Phoenix BIOS password recovery/removal issues should be taken up with Phoenix Technologies, hard drive password recovery/removal should be taken up with the manufacturer of the hard drive, etc...
[b][u]To those viewing this post: Please DO NOT respond any further to this thread.[/u][/b]
[i]This template has been released under the GNU public license and you are encouraged to use it as a standard reply for questions of similar nature, provided that you make any modifications available to other users.[/i]
---
by seanferd Accepted solution
by older mycroft Accepted solution
by seanferd Accepted solution
by oh smeg Accepted solution
by older mycroft Accepted solution
by the scummy one Accepted solution
1st, remove the battery and unplug the unit.
remove the keyboard.
Identify the BIOS
Use a stun gun at full power to shock the BIOS -- plug in unit again, if it was not shocked right it needs more voltage, so do it while it is plugged in.
If you do not have a stun gun, there is another way. Get a couple of long power cables. Cut one end off of them (the female end). Wrap the ground wire around your wrist for good measure.
next, (with the power off) tie one of the other 2 wires to the BIOS and the nearest chip (RAM). Make sure that it is secured in place.
Next, take the other wire and wrap it snugly around your OTHER wrist.
Plug in the other end of the power cable for .8 to 2.2 seconds. Any less will not have an effect, any more may burn the BIOS.
by robo_dev Accepted solution
by the scummy one Accepted solution
by oh smeg Accepted solution
You forgot to mention Lubricating the BIOS Chip with Battery Acid to ensure a good contact to Shock the BIOS Properly.
Col
by seanferd Accepted solution
should provide ions to the solution for better conductivity. The colloidal solids in suspension in the mud won't help, but there's got to be some ionic solids in the mud, you'd think.
Maybe you could market Scummy's Special BIOS Cracking Mud.
by older mycroft Accepted solution
Like the suspension for printing ink, which can be electro-statically charged at will.
Providing you're still alive. ;)
by seanferd Accepted solution
by rob miners Accepted solution
This discussion is closed to new replies.
Trending Smartphones posts
Sort by Trending