4 replies
by ria 7 Accepted solution
by robo_dev Accepted solution
by brian Accepted solution
by oh smeg Accepted solution
Depending on the Make & Model of the M'Board some didn't provide Native Support for SATA Drives even though they did have the ability to connect SATA Drives.
These Old M'Boards required SATA Drivers to be loaded at the beginning of Installing the OS so that the OS could be loaded and Booted off the SATA Drive. This was sometimes called a RAID Driver depending on the maker of the M'Board.
If you have changed the M'Board and the system is not booting you need to do a In Place Install of your OS and this time Include the SATA Driver. This may not be easy or possible depending on the current configuration as you generally speaking need a Floppy Drive where you copy the SATA/RAID Driver tot he Root of a Floppy.
You'll need a M$ Branded Install Disc and follow the Directions listed under Method 2 here
http://support.microsoft.com/kb/978788
That is the directions for installing XP to the Unit but you'll also need to press the [b]F6 Key[/b] when the first Blue Screen Appears and wait till you are prompted to insert the Floppy into the A Drive. If you are using a different version of Windows you'll need to look up the directions for that Version at the M$ Web Site.
Col
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending