Discussion Locked

Block Internet Access

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are currently running Windows 2003 Server. Most clients are running XPpro. Our ISP hosts our web site and our email. I am currently blocking some clients from accessing the Internet using the small router tied to the Internet. I can block their access using the MAC address (but only 20). I also have some clients that are using email but are not allowed to have Internet access. I have unblocked their MAC address from the router and used Group Policy (local) to block certain programs such as IE. We have started using some new software that requires the use of IE. This requires that I must unrestrict the use of IE in Group Policy. For those that need email this will also give them Internet access. My question is, is their a way to block a certain MAC address and port (port 80)combination from accessing the outside world but still allow it to work on the Intranet? Is there a firewall device that will do this?

Thanks

14 replies

by anil_koushal

It will be better to install an IPTABLES based firewall and you will have full freedom to block anything without any limitation. if you have enough money then you may purchase firewall box like watchguard,pix, checkpoint etc.

by sprinkl3s

instead of doing this at the firewall level why not use a group policy. make a group policy to change the proxy addresses 0.0.0.0 and set it so that it does not use the proxy address for the intranet sites.

by nayeem

You can use ISA server which will solve all your issues without any problems.

by jordanspcrepair

You could disable the DHCP client service on the client computers that you don't want on the internet, but still want to be able to use the network. use the services.msc to disable the DHCP client service.

by brad

I recently created a Group Policy IP Security Policy which allows restriction of internet access altogether to machines within that OU, but which can also be filtered to simply allow blocking of access to specific DNS hosts.
If anyone still needs and answer tot his issue, please let me know.

by dlwells1

Brad, would really like to get the answer to the issue regarding you Group Policy IP Security Policy allowing internet restrictions.. please reply to dlwells1@comcast.net

Thank you, Dave

by bissell

Brad,
I too would like to see what you did to limit internet access via GP - please send to bissell@fusz.com.

Thank You!

by batman9526

Brad, Trying to do this on a network using windows 2003 any help would be great. Contact me at WSantamorena@Yonkersraceway.com

by ckmorgan78

I coudl really use thsi information. I have several station that need to be clocked from internet traffic but will still need to be able to use their browser for intranet stuff.

Thnaks in advance.

by rafal

What if I want to block a user from accessing the internet/email but only when he does it on one PC. Let's say you have a PC that you want network access but only local.

I was thinking of disabling run on the executables. Can anyone think of another way to do it?

by surprize_4_u

Hi,
Thanx for your lovely Concept.
I want to ask how to block Client's Mac Addresses By Using ISA SERVER 2006 which is installed in windows 2003 Server.

Waiting for your early Response

Thanx & Regds

ADIL HANIF

by zay1967

you can use a fake proxy server address, that will prevent internet access but allow intranet access.

by ddruda

Through the GPO, I use the fake proxy, I tell it to use the proxy for local addresses, and I tell it to bypass the proxy for certain specific local addresses. It will only recognize FQDN's. If I use just the server name, it fails. For example, http://server.domain.com works. http://server does not.
Without the GPO in force, either name works successfully.
Any thoughts what may be happening?

This discussion is closed to new replies.